周丽春
摘要:随着城市的发展和科学技术的进步,高层建筑(10层及10层以上或房屋高度超过28m的建筑物)的应用日益广泛。在满足使用功能的情况下,高层建筑如何才能达到既安全又经济的设计要求这是结构设计人员必须面对的问题。对于高层结构设计来说,位移比、周期比、刚度比、层间受剪承载比、刚重比、剪重比、轴压比是保证结构规则、安全、经济的七个极其重要的参数,《抗震规范》、《混凝土规范》《高规》均在相关章节对以上"七个比值"进行了严格控制。
关键词:高层建筑;结构设计;七个"比值";规范条文; SATWE程序;电算结果;名词释义;控制与调整
Abstract: with the development of the city and the progress of science and technology, high-rise buildings (10 layer and 10 layer above or a house height more than 28 m buildings) are applied widely. To satisfy the use function, high building how to achieve both safe and economic design requirements of this is structure design personnel must face the problem. For top structure design for, displacement ratio, cycle, stiffness, layer than than between shear bearing than, than just heavy, heavy cut than axial compression ratio, is the guarantee structure rules, safety, economic seven extremely important parameters, the seismic code ", "the concrete code", "high rules" are in the relevant sections on the above "seven ratio" are strictly control.
Keywords: high building; Structure design; Seven "ratio"; Standard article; SATWE program; Computing results; Nouns explanation; Control and adjustment
中图分类号:[TU208.3]文献标识码:A 文章编号:
1位移比
1. 1名词释义
位移比包含两项内容:
(1)楼层竖向构件的最大水平位移与平均水平位移的比值。
(2)楼层竖向构件的最大层间位移与平均层间位移的
比值。计算位移比仅考虑墙顶、柱顶等竖向构件上节点的最大位移,不考虑其他节点的位移。高层建筑层数多、高度大,為保证高层建筑结构具有必要的刚度,应对其位移比加以控制。
1. 2相关规范条文的控制
[抗规]3. 4. 2条规定:建筑及其抗侧力结构的平面布置宜规则、对称,并应具有良好的整体性;当存在结构平面扭转不规则时,楼层的最大弹性水平位移(或层间位移),不宜大于该楼层两端弹性水平位移(或层间位移)平均值的1. 2倍。[高规]4. 3. 5条规定:楼层竖向构件的最大水平位移和层间位移,A、B级高度高层建筑均不宜大于该楼层平均值的1. 2倍;且A级高度高层建筑不应大于该楼层平均值的1. 5倍,B级高度高层建筑、混合结构高层建筑及复杂高层建筑,不应大于该楼层平均值的1. 4倍。……