张阿莉+刁学敏+刘威
摘 要: 针对新型飞控采集器采集数据流数增多、试飞模式改变的问题,对原有飞行控制系统总线数据处理软件进行优化设计。使用内存影射技术管理原始数据的读写操作,同时优化设计校线文件管理模块和参数文件管理模块,实现了多流、多表号飞控数据的快速处理。通过工程使用验证,软件有效解决了多流、多表号飞行控制系统总线数据处理问题。
关键词: 飞行控制系统; 总线数据; 多流多表号; 优化设计
中图分类号: TN911?34; TP311 文献标识码: A 文章编号: 1004?373X(2014)07?0073?03
Optimization design of new type flight control system bus data processing method
ZHANG A?li, DIAO Xue?min, LIU Wei
(Chinese Flight Test Establishment, Xian 710089, China)
Abstract: Aiming at the data stream of new type flight control system collection facility increasing and flight?test mode changing, the original flight control system bus data processing software is optimized. Technology of memory mapping is used to manage the reading and writing of original data and optimize the design of calibration curve file management module and parameter file management module, thus to realized the quick processing of flight control data with multithread and multi?table. Practical use in project proved that the software has the ability in solving the problem of processing the data of flight control system with multithread and multi?table.
Keywords: flight control system; bus data; multithread and multi?table; optimization design
0 引 言
随着新型飞机型号研制任务的快速发展和课题需要的变化,飞行控制系统(简称飞控系统)作为新型飞机设计定型试飞中一个必不可少的测试系统,面临着试飞测试参数的数量和种类不断增加(以前试飞参数数量至多上百个,现在已经增加到几千个)、新型飞控系统采集、记录总线数据的模式由1流增加到5流,试飞模式由单表号试飞变化为一次飞行多个表号试飞。用原飞控系统总线数据处理软件(原数据处理软件只针对单流数据进行处理、一次处理单个表号试飞数据、数据处理效率较低)已无法满足新型飞机试飞高效的数据处理需求。因此,急需优化设计新型飞控系统总线数据处理软件。
1 软件设计
该软件采用结构化、模块化设计思路,适应性强。软件主要包括配置文件模块、参数校线解析模块、数据处理模块、源码分析模块、批处理模块和故障检查六个模块。……