白光LED无线光通信传输系统的设计与实现

2014-04-29 13:29:02李程
智能计算机与应用 2014年5期
关键词:单片机

李程

摘 要:在信息化高度发展的今天,无论军用,商用或是民用,均需要高速传输且不对外界造成任何干扰。与传统的射频通信以及其它无线光通信系统相比较,可见光通信技术具有发射功率高、不占用无线电频谱、无电磁干扰和无电磁辐射、节约能源等诸多优点。而白光LED采用电场发光和低电压供电,具有寿命长、光效高、稳定性高、安全性好、无辐射、低功耗、抗震、可靠耐用等特点,同时又具备响应时间短、高速调制的特性。鉴于上述情况,设计开发了一种白光LED无线光通信传输系统,本系统主要功能是在维持照明的同时,应用高频闪烁的方法实现设备间的信息和数据传输,而不对其他射频通信设备造成干扰,实用性强。

关键词:可见光通信;串口通信;单片机

中图分类号:TN929 文献标志码:A 文章编号:2095-2163(2014)05-

The Study of Modulation Technology on White-light LED Wireless Communication

LI Cheng1, CHENG Xiaoxu2, JIANG Qingfeng2, YU Haitao2

(1 Department of Electronic Information Science and Technology, School of Astronautics, Harbin Institute of Technology, Harbin 150010,China;2 College of Computer Information Science and Technology, Daqing Normal University, Daqing Heilongjiang 163712,China)

Abstract: In present society, information technology is highly developed. A transmission mode,which has high speed and no interference to other transmission mode, is required in military, commercial and civil use. Comparing with the traditional Radio Frequency Communication and other wireless light communication systems, the Visible Light Communication is superior in high transmitting power, no occupying in radio frequency spectrum, no electromagnetic interference (EMI), no electromagnetic radiation and energy saving.Moreover, white LED use electroluminescence and low voltage, featured in long service life, high light efficiency, high stability, good safety, free radiation and low power consumption. It is anti-seismic, reliable and durable. Simultaneously, it also takes less time to answer and is easier to be modulated. Therefore. the system is designed and created. It can not only be used as light, but also transmit information and data with the help of LEDs high-frequency flicker. Different from other systems, it wont disturb other RF equipments. So, this system is useful.

Key words:Visible Light Communication; Serial Communications; Single Chip Microcomputer

0 引 言

随着LED 的迅速发展,白光LED采用电场发光和低电压供电,因而具有寿命长、光效高、稳定性高、安全性好、兼及无辐射、低功耗、而且抗震、可靠和耐用等技术特性,此外白光LED还表现了响应时间短、调制高速的指标特性[1]。在此背景下,借助同时实现照明和通信双重功能,催生了一门新兴的无线通信技术----可见光通信技术,并已经成为多个国家的研究热点,尤其引发关注的是日本“可视光通信联盟”的开创以及美国斥资1.85 亿美元、且为期10年的“智能照明”项目的设立和推进。迄今为止,可见光通信大多处于实验阶段,虽然整体系统已有实现,但距离实用阶段却还有一定的距离,系统的各项性能也有待进一步地提高与增强[2]。……

登录APP查看全文

猜你喜欢
单片机
基于单片机的SPWM控制逆变器的设计与实现
电子制作(2019年13期)2020-01-14 03:15:28
基于单片机的层次渐变暖灯的研究
电子制作(2019年15期)2019-08-27 01:12:10
基于单片机的多功能智能插排
电子制作(2019年11期)2019-07-04 00:34:48
基于单片机的便捷式LCF测量仪
电子制作(2019年9期)2019-05-30 09:42:02
小议PLC与单片机之间的串行通信及应用
电子制作(2018年12期)2018-08-01 00:48:04
MSP430单片机在仿真中要注意的几点问题
电子制作(2017年9期)2017-04-17 03:00:53
基于单片机的平衡控制系统设计
电子制作(2017年19期)2017-02-02 07:08:27
基于单片机的三维LED点阵设计
电子制作(2016年21期)2016-05-17 03:52:51
Microchip推出两个全新PIC单片机系列
基于Proteus的单片机控制系统的仿真设计