基于TMS320F2812的调光器系统的设计

2014-07-19 18:23:06李立凯杨帆杨宁
现代电子技术 2014年10期

李立凯 杨帆 杨宁

摘 要: 为解决因仿真设备的屏幕凹凸不平而使其反射特性存在剧烈闪烁,从而影响其仿真试验的置信度,提出在入射光处加调光器。设计基于TMS320F2812芯片的调光器系统,给出系统软硬件设计。该系统在PID控制基础上,添加前向反馈控制环节,增加了系统的跟踪特性。依据理论推算和大量测试结果,确定系统参数,结果表明该系统能够满足实际要求。

关键词: 运动控制; TMS320F2812; 调光器; 绝对位置; PID

中图分类号: TN911?34 文献标识码: A 文章编号: 1004?373X(2014)10?0110?03

Abstract: A design scheme putting a dimmer before the incident light is proposed to solve the intense flash existing in display reflection due to the uneven display of the simulation device. The dimmer system based on TMS320F2812 chip was designed. The system hardware and software design process is given in this paper. The innovation is that adds a forward feedback control link based on the PID control, and increases the tracking characteristics of the system. According to theoretical calculation and results of extensive testing, the system parameters has been confirmed. The results show that the system meets the actual requirements.

Keywords: motion control; TMS320F2812; dimmer system; absolute position; PID

为满足面阵CCD航空相机获得清晰图像的需要,设计了一种以数字处理芯片TMS320F2812为核心的调光控制器。仿真设备因屏幕出现凹凸不平,反射特性存在剧烈闪烁,影响其仿真试验的置信度[1?4],特进行改造。需在其入射光处加调光器。为了保证面阵CCD器件的曝光时间与地面景物照度相匹配,做到既不过曝光也不欠曝光,正确反映景物细节,并获得较高的判读效果,必须进行自动调光控制[1,3,5]。本文详细阐述了基于TMS320F2812芯片的调光器系统软硬件设计,系统设计电路简单, 处理速度快, 容易用软件编程实现调光算法和控制信号的产生, 工作稳定,可靠性和精度较高。

1 调光器系统工作原理

调光器是在目标模拟器出口处增设调光器即光能调节装置,工作时调光器与周视镜联动。当目标景像经大屏幕上某位置反射后,调光器要据位置信息查表获得目标景像光能,若目标景像光能低于平均值,转动调光器,增大目标模拟器出射光能,进行补偿。……

登录APP查看全文