严会会+孙立萌+刘国美
摘 要: 基于Flyback拓扑,提出一种低成本、可靠的调压电路,实现对铅酸电池均浮充充电的控制。利用PWM信号,通过二级RC滤波电路,产生一个与占空比有关的直流电压。将此直流电压加在反馈基准芯片TL431的Vref管脚,通过改变反馈电压实现输出电压的可调。经过多次的电路测试,验证了在PWM控制下实现对铅酸电池的均浮充充电控制。研究结果表明,设计的PWM调压电路可以实现对电池的智能充电,具有一定的工程价值。
关键词: Flyback; PWM; 均充; 浮充; 智能充电
中图分类号: TM923.34 文献标识码: A 文章编号: 1004?373X(2014)14?0153?03
Intelligent charging technology based on Flyback topology
YAN Hui?hui, SUN Li?meng, LIU Guo?mei
(Xian Aeronautics Computing Technique Research Institute, AVIC, Xian 710065, China)
Abstract: Based on the Flyback topology, a low?cost and reliable voltage regulator circuit which can implementation intelligent charging of the lead?acid battery is proposed. By using PWM signal, DC voltage related to the duty ratio is generated through secondary RC filtering circuit. This DC voltage is applied to the Vref pin in the feedback reference chip TL431 to achieve an adjustable output voltage by varying the feedback voltage. The circuit testing results prove that the intelligent charging control of lead?acid battery can be realized by means of PWM control. The research results show that the designed PWM voltage regulator circuit can realize intelligent charging, and has a certain engineering value.
Keywords: Flyback; PWM; equalized charging; float charging; intelligent charging
0 引 言
阀控铅酸蓄电池(Valve Regulated Lead?acid battery)采用硫酸做电解液,用二氧化铅和绒状铅分别作为电池的正极和负极。因其制造成本低、性能可靠、容量大、价格低廉等优点,已成为世界上产量最大、用途最广泛的电池蓄电池品种。铅酸电池经过一百多年的发展,技术不断更新,现已被广泛应用于汽车、通信、电力、铁路等各领域。但是,若使用不当,其寿命将大大缩短。影响电池寿命的因素很多,其中充电的好坏也是一个重要因素[1?2]。目前对电池常用的充电方式是均充和浮充。开始时以均充方式,即恒流充电,在此过程中电池容量快速上升,当电池电压接近浮充电池时,转入浮充,即恒压充电,此过程保持充电电压不变,电流随着电池电压的上升不断减小,直至电池充满[3?4]。本文基于反激电源拓扑,利用改变TL431反馈电压值实现电源输出电压的可调,进而对VRLA电池实现均充和浮充,即智能充电。……