张旭东等



摘要:以六亚甲基二异氰酸酯(HDI)和三羟甲基丙烷(TMP)为主要原料,聚乙二醇400(PEG400)为非离子亲水改性剂,羟乙基磺酸钠为离子亲水改性剂,合成了双重亲水改性聚氨酯固化剂.研究发现:反应温度、反应时间、n-NCO/n-OH ,PEG400用量、羟乙基磺酸钠用量及多元醇和固化剂的配比对固化剂及涂膜性能均有影响.当反应温度控制在80 ℃,反应时间控制在3 h,n-NCO/n-OH比值为3.0,PEG400质量分数为15.8%,羟乙基磺酸钠质量分数为3.17%,多元醇与固化剂的配比m-NCO/m-OH在1.4~1.6时涂膜的硬度、耐水性、耐乙醇性最佳.研究中使用傅里叶变换红外光谱和高分辨扫描电镜等仪器对合成过程及涂膜性能进行了表征.
关键词:涂料;水性聚氨酯;固化剂;双组分;双重改性
中图分类号:TQ 323.8 文献标识码:A
Abstract:Doubly Modified Waterborne Polyurethane Curing Agent was successfully synthesized with Hexamethylene diisocyanate (HDI) and Trimethylolpropane (TMP) as the main materials, Polyethylene Glycol 400(PEG400) as the nonionic modifier and sodium hydroxyerthyl sulfonate as the ionic modifier. The properties of the curing agent and films such as gloss, hardness, solvent resistance, and water resistance were significantly affected by the amount of PEG400,sodium hydroxyerthyl sulfonate and the reaction temperature , reaction time and the ratio of dispersion to curing agent. The optimum performance was obtained with the content of PEG400 and sodium hydroxyerthyl sulfonate reaching 15.8% and 3.17%, and the reaction temperature and time were kept at 80 ℃and 3h, and the ratio of curing agent to dispersion was 1.4~1.6. Furthermore, the synthetic process of the curing agent and film properties were characterized by FTIR and SEM, etc.
Key words:coating;water polyurethane; curing agent; twopackage;double modification
双组分水性聚氨酯不仅环保,且成膜温度低,涂膜光泽度好、耐磨性、耐水性和耐溶剂性好,是当前水性涂料的研究热点[1].双组分水性聚氨酯由多异氰酸酯固化剂组分和水性多元醇组分组成,涂膜前将两者混合均匀.成膜时,固化剂中的NCO与多元醇中的OH反应,形成交联型涂膜.
双组分水性聚氨酯中使用较多的多异氰酸酯为亲水改性的多异氰酸酯,亲水改性的多异氰酸酯分为非离子改性和离子改性两类.非离子亲水改性多使用聚醚改性,将多异氰酸酯与聚乙二醇单醚反应,把亲水性的非离子醚链段引入多异氰酸酯分子结构中,提供亲水性,但聚醚的引入带来了耐水性问题和结晶性倾向[2-6].离子改性包含阳离子改性和阴……