T形肋GFRP抗剪连接件的静载推出试验

2016-04-20 20:53:34黄海林宾智祝明桥曾垂军吕伟荣
建筑科学与工程学报 2016年2期

黄海林 宾智 祝明桥 曾垂军 吕伟荣

摘要:为改善玻璃纤维增强塑料(GFRP)与混凝土的界面粘结性能,进行了3组共计9个T形肋GFRP抗剪连接件的静载推出试验,主要考虑了T形肋内开孔及横向穿孔钢筋2个参数对其抗剪性能的影响,得到了破坏形态、裂缝分布规律及荷载相对滑移关系,分析了T形肋对GFRP抗剪连接件粘结滑移性能、极限承载力以及破坏机理的影响。基于试验得到的破坏机理建立了T形肋GFRP抗剪连接件的极限承载力计算公式。结果表明:T形肋增加了GFRP抗剪连接件与混凝土的接触面积,提高了界面的粘结力;界面出现滑移后,T形肋孔内的混凝土榫或钢筋混凝土榫能提供更好的抗剪性能;孔内是否配置横向穿孔钢筋将导致试件出现2种不同的破坏形态。

关键词:抗剪连接件;GFRP;推出试验;T形肋;粘结滑移;极限承载力;破坏机理

中图分类号:TU398文献标志码:A

Abstract: In order to improve the interfacial bond properties between GFRP and concrete, pushout tests were conducted to investigate the mechanical behaviors of nine Ttype rib GFRP shear connectors, considering the effects of holes and horizontal perforated steel bars. The failure patterns, crack distribution rules and loadslip relationships, were obtained by contrast experiments. The loadslip behaviors, damage mechanisms and ultimate bearing capacities were analyzed. The formulae of ultimate bearing capacity were proposed. The results show that contact surface areas are increased and interfacial bond properties between Ttype rib GFRP shear connectors and concrete are improved. Concrete tenon or rebar tenon of Ttype perfobond rib GFRP shear connectors can provide better shear capabilities after interface slipping. Whether the configuring of horizontal perforated steel bars lead to two different failure patterns.

Key words: shear connector; GFRP; pushout test; Ttype rib; bondslip behavior; ultimate bearing capacity; failure mechanism

0引言

玻璃纤维增强塑料(Glass Fiber Reinforced Plastic,GFRP)是由玻璃纤维与树脂基体材料复合而成,可经过压制、缠绕、拉挤等工艺加工成各种工程结构用型材。GFRP混凝土组合结构是将GFRP构件和混凝土浇筑成为整体而共同受力的一种结构,它能够充分发挥GFRP受拉与混凝土受压性能好的优点,是工程结构的重要发展方向之一[13]。在这种组合结构中,GFRP构件和混凝土之间可以通过抗剪连接件实现共同工作,因此抗剪连接件在GFRP混凝土组合结构的设计中显得非常重要。为改善下部GFRP构件与上部混凝土的界面粘结性能,Matsui等[4]、韩国建设技……

登录APP查看全文