杨新领 郑奔 李志强 郑浦


摘 要:该文采用D50=3.5μm、5μm、10μm、14μm、20μm的五种SiC微粉制备压坯密度相近的反应烧结碳化硅试样,研究了SiC微粉的粒度对反应烧结碳化硅陶瓷材料显微结构及机械性能的影响。结果表明:反应烧结碳化硅中游离硅尺寸大小和分布受SiC微粉粒度影响,且随着SiC粒度的增大,游离硅含量增多且尺寸增;SiC微粉粒度影响游离硅含量和尺寸大小,进而影响反应烧结碳化硅陶瓷的强度,SiC微粉粒度在3.5μm时,三点抗弯强度为457 MPa,断裂韧性为3.9 MPa·m0.5。
关键词:粒度 碳化硅 显微结构 性能
中图分类号:TQ174 文献标识码:A 文章编号:1674-098X(2016)01(b)-0029-03
Abstract:In this paper, D50 = 3.5μm, 5μm, 10μm, 14μm, 20μm five silicon carbide powder were used to prepare a similar density of samples. Investigate the particle size of silicon carbide powder influence the microstructure and mechanical properties of reaction bonded silicon carbide ceramic materials. The results show that: the SiC powder particle size affects the free silicon the size and distribution in the reaction bonded silicon carbide, and the content of free silicon increase with particle size increasing; SiC powder size affects the free silicon content and size,thereby affecting the Bending strength and Fracture toughness of the silicon carbide ceramics. When the particle size of silicon carbide powder is 3.5 μm,the Bending strength value is the maximum(457 MPa),and the Fracture toughness is 3.9 MPa·m0.5.
Key Words:Particle-size;Sic;Microstructure structure;Properties
反应烧结碳化硅陶瓷具有较高的机械强度和硬度,耐腐蚀、耐高温、抗热震性能好,被广泛的应用在机械、石油、化工、电子等领域,与无压烧结碳化硅陶瓷相比,反应烧结碳化硅陶瓷生产成本低、可制备复杂形状产品、易实现近净尺寸成型等优点[1,2],已经形成大规模生产,但由于现有反应烧结碳化硅陶瓷产品中存在游离硅,降低机械性能的和高温使用性能[3]。近年来很多研究者致力于提高反应烧结碳化硅的性能研究,已有研究表明,游离硅的含量和尺寸是影响高性能RBSC的主要因素,游离Si尺寸越细小,材料断裂强度越高[4]。该文系统研究了采用不同粒度的SiC微粉制备的反应烧结碳化硅中游离硅的尺寸的变化,从而研究其对反应烧结碳化硅材料显微结构与机械性能的影响。
1 实验过程
实验中选用D50=3.5 μm、5 μm、10 μm、14 μm、20 μm5种粒度的碳化硅微粉与炭黑为原料,水溶性树脂为粘结剂。……