修丽群
摘 要:目前常规超稠油取样器通常是短管与管线相接进行局部取样,样品含水率误差大;并且由于取样器暴露在室外冬季易冻堵。为完善取样技术,设计了一款新型球形阀旋转取样器,通过球形阀的旋转将管道中一段区域内的流体完整取出,有效减小取样误差,并且取样过程不影响管道正常运行,还可充分利用管道中流体的温度,避免发生冻堵现象。通过数值模拟分析含水率、流体速度、油品粘度及球形阀旋转速度对样品含水率误差的影响。通过计算分析可得适用于该取样器的最佳工况条件,对该新型超稠油取样器在实际生产中的应用及推广有一定的指导作用。
关 键 词:取样器;冻堵;含水率误差;数值模拟
中图分类号:TQ 018 文献标识码: A 文章编号: 1671-0460(2016)08-1896-04
Abstract: Currently conventional super heavy oil sampler is to use short tube to connect the pipe to subsample, which can make error because of the uneven distribution of fluid in the pipeline. Since the sample is exposed to the outdoor partly, heat of the fluid is easy to dissipate in the sampling process, causing frozen blocking phenomenon. To improve the sampling technique, a new type of ball valve rotary sampler has been designed, which can take out the fluid of the entire region of the pipe section by rotating the ball valve, reducing the sampling error effectively. And the sampling process does not affect the normal operation of the pipeline, it can also take advantage of the temperature of the fluid, avoiding frozen phenomenon. Through calculation and analysis, the best working condition for the new this sampler can be found.
Key words: sampler; frozen block; moisture content error; numerical simulation
目前超稠油管道中常用的取樣器是短管与管线搭接而成的,取样位置固定且片面,造成取样误差;取样器局部暴露在室外,流体温度易散失造成冻堵现象[1-4]。国内外许多学者对于超稠油取样器的改进多是从改变保温层材质或是改变取样位置出发,未能有显著效果[5,6]。本文设计的新型超稠油取样器,在球形阀的基础上进行了一系列的优化设计,克服了常规取样器取样位置片面,不易保温的缺点。该取样器作为管道中的一部分,可通过球形阀旋转将管道内一段完整流体取出,有效减小取样误差;并且在取样过程中可充分利用管道中流体的热量防止超稠油遇冷形成冻堵。……