掺炼沸腾床加氢未转化油对焦化产品及性质影响

2016-07-10 20:40:48初人庆郭丹刘继华宋永一乔凯杨涛
当代化工 2016年4期

初人庆 郭丹 刘继华 宋永一 乔凯 杨涛

摘 要:在中型延迟焦化试验装置上考察了减压渣油掺炼沸腾床加氢未转化油后,焦化产品分布及产品性质变化情况,结果表明:VR经沸腾床加氢处理后的未转化油馏分中,胶质含量大幅降低,饱和分含量明显提高,焦化原料性质有所改善;在相同的焦化试验条件下,随着未转化油掺炼比例提高,干气、液化气、汽油产率提高,柴油、重油及焦炭产率降低,产品分布有所改善。

关 键 词:延迟焦化; 沸腾床; 未转化油; 掺炼

中图分类号:TE 624 文献标识码:A 文章编号: 1671-0460(2016)04-0697-03

Abstract: Under normal industrial delayed coking conditions, the vacuum residue was processed in an experimental delayed coking installation by blending unconverted oil, the effect on the product state and product quality were investigated. The results show that resin content is greatly reduced, saturates content increases significantly, coking feedstock properties are improved. Under the same coking conditions, with increasing of unconverted oil blending ratio, the dry gas, liquefied gas and gasoline yields increase, the diesel oil, gas oil and coke yields reduce.

Key words: Delayed coking; Ebullated-bed; Unconverted oil; Blending

沸腾床渣油加氢技术是加工处理高残碳、高硫及高金属含量等劣质原料油的重要技术之一[1],该技术可使劣质渣油达到较高的转化率及脱杂质率,较传统的固定床渣油加氢技术,沸腾床渣油加氢装置运转周期更长[2,3]。随着全球原油质量越来越劣质化,作为可有效实现渣油最大转化技术之一的沸腾床渣油加氢工艺过程,将会越来越得到炼厂的广泛应用[4,5],但关于沸腾床加氢未转化油的进一步深加工处理鲜有文献报道。延迟焦化工艺过程因其技术成熟、原料适应性强、产品灵活性大、操作可靠性高以及投资和操作费用相对较低,已成为全球渣油加工主要过程之一[6-8]。本文考察了减压渣油经过沸腾床加氢裂化后未转化油性质变化以及延迟焦化装置掺炼未转化油后焦化产品分布及性质影响。

1 实验部分

1.1 原料

减压渣油(VR)及VR经沸腾床加氢后的未转化油均由某石化企业提供,VR及VR中分别掺炼10%、30%(占混合原料质量百分比)加氢未转化油的混合油分别作为三种延迟焦化装置进料。……

登录APP查看全文