周英杰 陆旭泽 张盛 陈玉震 陈飙松
摘要: 针对复杂环境和加载条件下的材料本构模型,参照Abaqus所提供的用户材料子程序UMAT接口,实现基于SiPESC平台弹塑性分析功能的UMAT本构模型插件封装及调用.采用C++面向对象程序设计方法编制inp文件读取功能插件,实现Abaqus计算模型向SiPESC平台数据库的导入.将不同UMAT单独编译成动态库,同时利用工厂设计模式,实现不同材料本构模型的动态替换和调用.该设计模式可方便添加本构模型,具有一定的通用性、开放性和可扩展性.数值算例的验证表明基于SiPESC平台的UMAT的有效性.
关键词: UMAT; SiPESC; 本构模型; 动态链接库; 工厂模式
中图分类号: TB115文献标志码: B
Implementation of userdefined mechanical material behavior
subroutine UMAT based on SiPESC platform
ZHOU Yingjie, LU Xuze, ZHANG Sheng, CHEN Yuzhen, CHEN Biaosong
(a. Department of Engineering Mechanics; b. State Key Laboratory of Structural Analysis and Industrial Equipment;
Dalian University of Technology, Dalian 116023, Liaoning, China)
Abstract: As to the constitutive models of material in complex loading condition and environment and referring to the userdefined mechanical material behavior subroutine UMAT interface in Abaqus, the plugins for various UMAT constitutive models are packaged on basis of the elastoplastic analysis function on SiPESC platform and can be called. According to the objectoriented program method in C++, the reading plugin for inp document is implemented and the Abaqus models can be imported into SiPESC database. The different UMAT subroutines are compiled as the dynamic link libraries, and the different material constitutive models are replaced and called dynamically by factory pattern. The constitutive models can be easily added in this design pattern, which has a certain universality, openness and extensibility. The numerical examples demonstrate the effectiveness of the UMAT based on SiPESC platform.
Key words: UMAT; SiPESC; constitutive model; dynamic link library; factory pattern
0引言
随着计算机和数值仿真方法的快速发展,有限元软件的功能和计算效率也得到快速发展.目前主流的通用有限元商业软件有ANSYS,Abaqus和MSC等.很多有限元软件都提供二次开发接口,以帮助用户实现针对特定问题的求解.随着对复杂环境和加载条件下材料性能研究的深入,通用有限元软件中已存在的材料模型已经无法满足研究者对问题的求解需要.针对这一问题,Abaqus提供用户材料子程序UMAT,帮助用户定义特定的材料本构模型和算法.因此,开发一些特定本构或计算问题的UMAT子程序成为实现数值模拟的途径之一.杨曼娟[1]采用基于Rankine准则的MohrCoulomb模型UMAT,改进原模型的解决对材料抗拉强度过高估计的问题.韩丁等[2]通过实验提出土工格栅本构模型,利用UMAT模拟长期蠕变变形趋势.唐菁菁[3]开……