LIU Yuntao,ZHAO Shuang,SHAO Lei(College of Information and Communication Engineering,Harbin Engineering University,Harbin 150001,China)
High Linearity Full-Differential Fourth-Order ΣΔ Interface ASIC for Micromachined Accelerometer*
LIU Yuntao*,ZHAO Shuang,SHAO Lei
(College of Information and Communication Engineering,Harbin Engineering University,Harbin 150001,China)
A full-differential four-order sigma-delta(ΣΔ)interface ASIC for capacitive micromachined accelerome⁃ter is presented to reduce quantization noise,switch charge injection,common mode disturbance of substrate noise and harmonic distortion.An effective simple full-bridge equilibrium architecture was brought forward to reduce the disturbance induced by the variation of common mode voltage of operational amplifier,when the driving signal alter⁃nating.To enhance the linearity of system,bilateral static force feedback was employed.Charge integrator,full-dif⁃ferential lead compensator,second-order integrator etc.were designed.The circuit was fabricated in 0.5 μm two met⁃al two poly n-well CMOS technology.The tested results indicated that the closed-loop noise density was 75 μg/Hz1/2,sensitivity was 1.32 V/gn,nonlinearity was 0.085%and the power dissipation was 40mW.All these properties met the design requirement of micromachined accelerometer.
micromachined accelerometer;high linearity;full-differentia sigma-delta
加速度计是一种可以将加速度物理信号转化成能够测量的电信号的仪器,具有μg水平高精度加速度计被广泛应用于导航、制导、空间微重力测量,以及自动化工业中[1]。当前很多惯性传感器的应用要用到计算机、微处理器和其他的一些数字器件,为了能够在数字领域处理信号,有必要将模数转换与传感器信号处理电路集成在同一个芯片上,集成的数字传感器不仅提供了更多的功能,而且降低了整个系统的成本。随着MEMS技术的发展,ΣΔ调制技术被引入到微机械加速度计设计中,微机械ΣΔ调制器结构简单,可以提供直接的数字输出,采用一位数字反馈可以大大降低静电力非线性问题[2]。微加速度计的敏感结构可以作为一个二阶ΣΔ调制器使用,然而由于敏感结构部分非常低的直流增益,使得二阶结构很难实现低的量化噪声[3]。高阶结构是降低系统量化噪声最有效的途径[4]。
由于敏感结构为三端器件,即两个固定电极和作为输出的中间可变电极,因此当前普遍采用单端检测方式对该输出信号进行处理,其优点是结构简单、控制时钟少,反馈易于实现,其缺点是零点漂移比较严重,驱动信号噪声对输出影响比较严重。事实上,也可将两个固定电极作为敏感结构的输出,采用全差分检测电路对信号进行处理,这样可以减小开关电荷注入和衬底噪声产生的共模干扰,提高电源抑制比,减小谐波失真。Lemkin M较早提出了一种差分结构的ΣΔ加速度计[5],但仅利用敏感单元自身的二阶低通特性作为积分器,量化噪声很大,无法得到高精度检测。……