小兴安岭天然林不同树种的树高曲线模型1)

2017-01-09 07:41:51冯国红朱玉杰王景峰
东北林业大学学报 2016年12期
关键词:模型

冯国红 朱玉杰 王景峰

(森林持续经营与环境微生物工程黑龙江省重点实验室(东北林业大学),哈尔滨,150040)



小兴安岭天然林不同树种的树高曲线模型1)

冯国红 朱玉杰 王景峰

(森林持续经营与环境微生物工程黑龙江省重点实验室(东北林业大学),哈尔滨,150040)

选用10种树高曲线模型作为候选模型,以决定系数(R2)、残差平方和(Sse)和均方差(Mse)作为模型优劣的评价指标,对小兴安岭天然林中的云杉(Piceaasperata)、红松(Pinuskoraiensis)、水曲柳(Fraxinusmandschurica)、椴树(Tiliatuan)4种树种的树高曲线模型进行优选。结果表明:云杉、红松和椴树的最优模型均为Logistic模型,水曲柳的最优模型为抛物线模型;云杉和红松两种针叶树种,最优模型的优势不明显,水曲柳和椴树两种阔叶树种最优模型的优势较明显;比较R2的大小,得出较适合小兴安岭云杉和红松两种针叶树种的树高曲线模型(R2>0.8),对小兴安岭阔叶树种的适用程度不具有普遍性,对椴树的适用性好(R2最大达0.94),对水曲柳的适用性较差(R2<0.8)。对水曲柳的树高进行分段研究得出:水曲柳在树高低于9 m时,树高曲线模型较适宜(R2>0.8),其中抛物线模型为最优模型;树高较高时,没有适用的树高曲线模型。

天然林;树高曲线模型;小兴安岭

Journal of Northeast Forestry University,2016,44(12):6-9.

We selected 10 tree height curve models as a candidate model and usesR2、SseandMseas the merits of the evaluation index to study the tree height curve model of spruce, pine, ash and basswood in the natural forests of Xiaoxing’an Mountain. The optimal model of spruce, pine and basswood are the Logistic Model, and for ash is the Parabolic Model. The advantages of the optimal model of conifer species of spruce and pine are not obvious, but the advantages of optimal model of broad-leaved species of ash and basswood are obvious. Compared withR2, tree height curve model is more suitable for the coniferous species of spruce and pine in Xiaoxing’an Mountain (R2>0.8), the applicability broad-leaved species does not have universal applicability of basswood good (R2Maximum of 0.94), and the applicability of ash is poor (R2<0.8). When ash tree height is less than 9 m, tree height curve model is more appropriate (R2>0.8), where the parabolic model is the optimal model. When tree height is higher, there is no tree height curve model for use.

获取树高的方法主要有两种:一种是测高器,如克里斯登测高器、圆筒测高器、普鲁莱测高器等[1],一种是树高曲线模型[2]。胸径是林分中最易获取的调查因子,应用树高-胸径曲线模型推算树高,是获取树高的重要方法。国内已经有许多关于各种树种树高曲线模型的研究[3-9]。不同地区的不同树种所适用的树高曲线有所差异,目前还未见有关小兴安岭天然林树高曲线模型研究的报道。本研……

登录APP查看全文

猜你喜欢
模型
一半模型
一种去中心化的域名服务本地化模型
适用于BDS-3 PPP的随机模型
函数模型及应用
p150Glued在帕金森病模型中的表达及分布
函数模型及应用
重尾非线性自回归模型自加权M-估计的渐近分布
3D打印中的模型分割与打包
FLUKA几何模型到CAD几何模型转换方法初步研究
一个相似模型的应用