高层剪力墙住宅的基础隔震结构设计与讨论

2017-03-27 13:24:48陈涛秦云
中国建筑科学 2017年1期

陈涛+秦云

摘 要:某高层剪力墙住宅,拟采用地下室顶板上的基础隔震技术。为掌握高层剪力墙住宅基础隔震结构的地震反应特性,分别对基础隔震结构和非隔震结构模型进行了分析和研究,对各自的周期、层间位移角、扭转位移比、楼层剪力和层间倾覆力矩进行了对比。分析结果表明,采用基础隔震技术后,上部结构的层间剪力沿竖向的分布规律有所改变;对于8度(0.2g)设防地区的18层小高层住宅建筑,采用基础隔震在技术上是可行和合理的。最后,本文结合分析过程及结果,对基础隔震设计中的软件、特定参数的选择等细节问题进行了探讨,可供工程研究和实践参考。

关键词:基础隔震; 橡胶隔震支座; 结构分析

中图分类号:TU318 文献标识码:B

Discussion on design of high-rise shear wall housing base-isolated structures

Chen Tao1 ,Qin Yun2

( 1. Yunnan university, Kunming; 2. Kunming Architectural Design And Research Institute Co ,Ltd, Kunming650011 ,China )

Abstract: A high-rise shear wall residential building, it is proposed basement roof base isolation technology. In order to know the characteristic of seismic response for the High-rise shear wall housing base-isolated structures well, the structure model of the base isolated structure and the general structure are be analysed and studied , then some comparison is be had with their period, story drift, torsional displacement ratio,story shear,Interlayer overturning moment . The analysis of the base isolation technique used in this project shows that: the distribution of the upper shear layer structure have changed; It is feasible and reasonable on technology for a18 floor of small high-rise residential buildings in a earthquake of 8degree(0.2g); at last, this paper probes into some detail including applying specific parameter , software in the designing process ,and the conclusion can be used for engineering research and practical reference.

Key words: base Isolation;Rubber isolating ;structural analysis;

1.工程概况:

云南梁河某工程,建筑平面如图1所示。抗震设防烈度8度,设计基本地震加速度峰值为0.2g,设计地震分组第三组,三类场地,特征周期0.65s。采用剪力墙结构形式,丙类建筑,楼层数19层,建筑结构高度57.1m,宽23.7m,高宽比2.41。

近年来,云南省加大了对减隔震技术的推广和应用,受盈江地震的影响,并考虑建筑市场的需求,上述工程拟采用基础隔震技术。隔震装置能够在一定程度上大大减小结构所受的水平地震作用,已被理论分析和国内外强震记录或震害情况所证实。本文以该剪力墙住宅为例,分别采用ETABS和SETWE基础隔震结构和非隔震结构进行了分析和研究,对周期、层间位移角、扭转位移比、楼层剪力和层间倾覆力矩等进行了对比。……

登录APP查看全文