谢凡

[摘要]目的 探討高速涡轮钻法在拔除下颌阻生齿中的临床效果。方法 选取2015年1~12月在我院行下颌阻生齿拔除治疗的100例患者(104颗牙)作为研究对象,采用随机数字表法分为观察组和对照组,各50例(52颗牙)。观察组采用高速涡轮钻法进行阻生齿拔除,对照组则采用传统的劈冠凿骨法进行拔除。比较两组的手术时间、术后疼痛程度、张口受限程度及干槽症发生率。结果 观察组的手术时间为(22.3±5.2)min,显著短于对照组的(36.3±6.9)min,差异有统计学意义(P<0.05)。观察组的术后VAS评分为(3.8±0.9)分,显著低于对照组的(5.3±1.2)分,差异有统计学意义(P<0.05)。观察组的张口受限程度低于对照组,差异有统计学意义(P<0.01)。观察组术后的干槽症发生率为2.0%,显著低于对照组的12.0%,差异有统计学意义(P<0.05)。结论 高速涡轮钻法拔除下颌阻生齿能够有效缩短手术时间,降低患者术后的疼痛程度及张口受限程度,控制并发症发生率,值得临床推广应用。
[关键词]下颌阻生齿;高速涡轮钻法;疗效;并发症
[中图分类号] R782.11 [文献标识码] A [文章编号] 1674-4721(2016)12(a)-0098-03
Clinical effect evaluation of high speed turbine drilling method in the extraction of mandibular impacted tooth
XIE Fan
Department of Stomatology,People′s Hospital of Luohu District in Shenzhen City,Shenzhen 518001,China
[Abstract]Objective To explore the clinical effect of high speed turbine drilling method in the extraction of mandibular impacted tooth.Methods 100 cases (104 teeth) of extraction mandibular impacted tooth from January 2015 to December in our hospital were selected and divided into the observation group and the control group according to the random number table method,50 cases (52 teeth) in each group.The observation group was treated with high speed turbine drilling method,and the control group was treated with traditional crown cutting method.The operative time,the postoperative pain degree,the degree of mouth opening limitation and the incidence rate of dry socket were compared between the two groups.Results The operative time in the observation group was (22.3±5.2) minutes,which was shorter than (36.3±6.9) minutes in the control group,with significant difference (P<0.05).The VAS score of the observation group after operation was (3.8±0.9) points,which was lower than (5.3±1.2) points of the control group,with significant difference (P<0.05).The degree of mouth opening limitation in the observation group was lower than that in the control group,with significant difference (P<0.01).The incidence rate of dry socket in the observation group was 2.0%,which was lower than 12.0% in the control group,with significant difference (P<0.05).Conclusion The high speed turbine drilling method can effectively shorten the operation time,reduce the degree of postoperative pain and the extent of mouth opening,and control the incidence rate of complications,it is worthy of clinical promotion and application.
[Key words]Mandibular impacted tooth;High speed turbine drilling method;Efficacy;Complication
下颌阻生齿的拔除是口腔科常见的操作,但对于近中或水平埋伏的阻生齿的拔除则是一项较为复杂的操作[1]。传统的阻生齿拔除采用劈凿、牙钳和牙挺相互配合的劈冠凿骨法进行拔除,但该项方案手术时间较长,且对患者的牙床损伤较大,术后疼痛明显,患者张口受限程度高,并发症较多[2-3]。随着近年来医疗技术的进步,高速涡轮手钻在口腔科临床中逐渐被普及,利用高速涡轮手钻去除牙阻力,再去除阻生齿可有效避免对牙床造成的过大损伤[4]。本研究就高速涡轮钻法拔除下颌阻生齿的临床效果进行评价,现报道如下。
1资料与方法
1.1一般资料
选取2015年1~12月在我院行下颌阻生齿拔除治疗的100例患者(104颗牙)作为研究对象,采用随机数字表法分为观察组和对照组,各50例(52颗牙)。观察组中,男性24例,女性26例;年龄为21~46岁,平均(29.4±4.6)岁。对照组中,男性23例,女性27例;……