付强+付朝辉+李谦+何东旭+赵玉成



摘 要:边坡加固措施经常采用锚杆支护的方法,其实用性在工程中已经得到一致认可。锚杆支护具有支护效果好、廉价、施工简单、施工速度快等优点。锚杆支护效果受到很多因素影响,如锚杆长度、锚杆支护角度、预应力等。施工中常通过调整支护角度与锚杆长度来提高锚杆支护效果,因此研究锚杆支护角度与锚杆长度对支护效率的影响十分必要。本文基于ANSYS软件,通过强度折减法,对无支护,对各种不同支护角度与锚杆长度情况下的边坡抗滑性进行了系统的分析,以给出最佳的锚杆支护角度与锚杆长度。
关键词:ANSYS;边坡稳定性;强度折减法;锚杆;安全系数
Research on slope stability under the bolts supporting parameters
Fu Qiang1,2,Fu Chao-hui1,Li Qian1, He Dong-xu1,2,Zhao Yu-cheng1,2
(1.China University of Mining Geomechanics and Deep Underground Engineering, State Key Laboratory of Xuzhou, Jiangsu 221116; 2.Chinese Mechanics and Civil Engineering, University of Mining and Technology, Xuzhou, Jiangsu 221116;
3. Railway Real Estate Group Qingdao Cheung Fung Company, Shandong 266071)
Abstract:Bolting support is frequently used for slope reinforcement, its usefulness in the project has been unanimously approved. Bolting support has many advantages such as good effect, cheap, simple construction, fast speed and so on. The effect of bolting support is influenced by many factors, such as the bolting length, bolting angle and prestressing. Adjusting the bolting angle and bolting length can improve support effect, so the research about bolting angle and the length is necessary. According to the strength reduction, based on ANSYS software, the paper analyzes the slip resistance of the slope to give the best bolting angle and bolting length, including different angles and bolting length.
Keywords: ANSYS; slope stability; strength reduction; bolt; safety factor
1.引言
边坡稳定性分析方法主要有基于边坡极限平衡法和基于有限元与有限差分的强度折减法[1]。极限平衡法基于对土条的各种假定[2-3],不能考虑边坡岩土体的应力、应变关系及边坡变形对稳定性的影响,更不能分析边坡滑动的发生和发展过程。而有限元的强度折减法克服了上述缺点,满足平衡條件的同时考虑土体应力、应变关系及边坡变形的影响,并模拟出滑裂面[4],通过各种加固措施下滑裂面情况的对比可以方便得出各种加固措施的效果。因此采用强度折减法能够方便的研究边坡及边坡加固的影响因素。
2.强度折减法
强度折减法原理为将土体的内聚力和内摩擦角 均除以折减系数f,得到新的土体参数指标c'和 ',再用新的参数进行有限元计算,如果边坡依然稳定,再将f增大一些,继续进行上述步骤,直到边坡处于临界状态,即再增加f,边坡将发生剪切破坏,此时的f被称为稳定性系数或安全系数[5-7]。……