盛强
摘要:针对农业温室分布地域广、分散的特点,设计了基于Modbus-RTU和GPRS通信的温室环境控制系统。系统由西门子S7-200 SMART PLC、触摸屏、GPRS模块和上位机服务器构成,利用Modbus-RTU采集现场温湿度、光照度等传感器的实时信号,并在触摸屏进行实时显示以及实现多种模式下的手动控制;通过GPRS模块把采集到的信息远程传送至上位机服务器,对信息进行接收和综合分析处理。现场测试表明,该系统结构设计合理、系统运行稳定,能够满足花卉温室远程监控的要求。
关键词:PLC;温室;Modbus-RTU;GPRS;远程监控
中图分类号:TP273 文献标识码:A 文章编号:0439-8114(2017)15-2935-03
DOI:10.14088/j.cnki.issn0439-8114.2017.15.034
Abstract: Aiming at the wide and scattered distribution of agricultural greenhouse, design the greenhouse environment control system based on Modbus-RTU and GPRS. The system consists of Siemens S7-200 SMART PLC, touch screen, GPRS module and host computer server, using Modbus-RTU to collect temperature and humidity, light and other sensors real-time signals, and display in the touch screen and realize the manual and automatic control. Through the GPRS module to collect the information, integrated analysis and processing. The results show that the reasonable design of the system structure, system function is stable, and can meet the requirements of remote monitoring of flower greenhouse.
Key words: PLC;greenhouse;Modbus-RTU;GPRS;remote monitoring
温湿度、光照度等环境因素对花卉及农作物生产起重要作用,让花卉作物避免受恶劣自然环境因素的影响,按照最佳模式生长至关重要,采用温室和大棚进行保护栽培可以达到目的[1,2]。目前,大多数温室采用单片机为主控制器。针对单片机控制系统开发周期长,且后期维护较困难等缺点,李燕飞等[3]、付焕森等[4]提出了基于PLC的温室智能控制系统,但是由于受到PLC点数的限制,须通过扩展模拟量模块对现场温室环境参数进行采集。近年来,Modbus-RTU网络通信技术因投资少、可靠性高等优点,在远程监控中应用广泛,但是在很多情况下,如农业温室在地理位置上较偏僻、温室之间、温室与控制室之间距离较远,实施网络布线比较困难。鉴于此,针对单个温室内传感器在空间布局上相对集中,而各个温室之间距离较大、占地面积广、与监控室距离远的特点,本研……