基于AT89C51单片机的红外线门控系统的设计

2017-09-28 12:02:39马健喆魏巍
电脑知识与技术 2017年24期
关键词:单片机信号设计

马健喆,魏巍

(太原理工大学信息工程学院,山西太原030024)

基于AT89C51单片机的红外线门控系统的设计

马健喆,魏巍

(太原理工大学信息工程学院,山西太原030024)

该文采用红外线为检测装置,基于AT89C51单片机设计实现了卷帘门自动升降控制系统。该系统主要由单片机及其外围电路、红外检测电路、步进电机控制电路等组成,通过卷帘门及其电机的选型来实现卷帘门的实际控制,并用步进电机模块对其进行模拟。实验结果表明,该文通过自动控制方式、设置蜂鸣器报警、设计密码锁,为避免因意外原因造成密码误输入设置了退格键,采用矩阵键盘作为密码键盘,保证了增加可选按键的数量,在软件设计中设置了相应循环和延时,增强了系统的安全性和可靠性。

单片机;红外感应;密码锁;步进电机

Abstract:The paper adopts infrared detection device,designs and realizes automatic lifting rolling door control system Based on AT89C51.The system mainly comprises microcontroller and its periphery circuits,infrared detection circuit,stepper motor con⁃trol circuit and so on,realizes the actual control of rolling door through the selection of rolling door and motor,and simulates by stepper motor module.The experiment results show the automatic control way can enhance the safety and reliability of infrared gate control system.The paper sets the buzzer alarm,designs the combination lock,sets the backspace key avoid of accidental pass⁃word input error,uses matrix keyboard as a password keyboard,ensures the increase in the number of optional keys,strengthens the security of the system.The corresponding circulation and time delay in the software design enhance the safety and reliability of the system.

Key words:Microcontroller;Infrared sensor;Combination lock;Stepper motor

1 概述

随着科技的进步,自动门控制系统越来越广泛地应用于银行、酒店、大型商场等公共场所或住宅,同时对其安全性及各方面性能的要求越来越高。本文采用红外线为检测装置,基于AT89C51单片机设计卷帘门自动升降控制系统。通过卷帘门及其电机的选型来实现卷帘门的实际控制,并用步进电机模块对其进行模拟。采用自动控制方式可以增强卷帘门的安全性和可靠性,密码输入与检查功能可以进一步增强所设计自动卷帘门系统的安全性和可靠性。

2 系统总体设计

本系统主要由单片机及其外围电路、红外检测电路、步进电机控制电路等组成。将单片机作为步进电机的控制器以实现卷帘门的自动控制。……

登录APP查看全文

猜你喜欢
单片机信号设计
信号
鸭绿江(2021年35期)2021-04-19 12:24:18
完形填空二则
基于单片机的SPWM控制逆变器的设计与实现
电子制作(2019年13期)2020-01-14 03:15:28
基于单片机的层次渐变暖灯的研究
电子制作(2019年15期)2019-08-27 01:12:10
基于单片机的便捷式LCF测量仪
电子制作(2019年9期)2019-05-30 09:42:02
瞒天过海——仿生设计萌到家
艺术启蒙(2018年7期)2018-08-23 09:14:18
基于FPGA的多功能信号发生器的设计
电子制作(2018年11期)2018-08-04 03:25:42
设计秀
海峡姐妹(2017年7期)2017-07-31 19:08:17
有种设计叫而专
Coco薇(2017年5期)2017-06-05 08:53:16
基于LabVIEW的力加载信号采集与PID控制