Research on the fault controlling mechanism of geothermal water in Zhangzhou Basin

2017-12-16 09:14:12GANHaonanLINWenjingYUEGaofanWANGXiaoMAFengWANGGuiling
地下水科学与工程(英文版) 2017年4期

GAN Hao-nan, LIN Wen-jing, YUE Gao-fan, WANG Xiao, MA Feng, WANG Gui-ling

Institute of Hydrogeology and Environmental Geology, Shijiazhuang 050061, China.

Abstract: Fault has an important influence on the storage and movement of geothermal water.The Zhangzhou Basin is wholly located in a granodiorite rock mass. Due to the low permeability of granodiorite, faulted structure has an evident control action on the hydrothermal activity of geothermal fields. Hot springs in Zhangzhou Basin crack along Pingtan-Dongshan Fault to the northeastern direction and emerge along Fu’an-Nanjing Fault. Through measurement of the temperature of several hot springs in the Basin, we found the temperature along the northwestern direction of Zhangzhou-Tianbao Fault is high and the temperature gap between the two sides of Yangxi-Yuanshan Fault is huge; the estimation of geothermal reservoir temperature of geothermal water through quartz geothermometer indicates that the geothermal reservoir temperature of the northern area of Nanjing-Xiamen Fault is obviously higher than that of southern area. Such result indicates that Fault obviously obstructs underground heat source. Under the condition that the average geothermal gradient of the Zhangzhou Basin is set,the circulation depth of the geothermal water of the Zhangzhou Basin measured by geothermal reservoir temperature is 3 550-5 200 m and the circulation depth of the geothermal water of the north of Nanjing-Xiamen Fault is deeper than that of the South.

Keywords: Faulted structure; Hydrothermal activity; Geothermal reservoir temperature;Circulation depth

Introduction

Common geothermal systems are internationally classified into two categories: One is high temperature geothermal system whose formation is related to magma hot source, such as Yellowstone National Park in the United States,Krafla in Iceland, Yangbajain in Tibet and geothermal fields in Yunnan Province Tengchong(PANG Zhong-he, 1987; BAI Deng-hai, 1994); the other one is low medium temperature geothermal system formed in sedimentary basin, such as Pannonian Basin in Hungary-Serbia region and Huabei Plain (Horváth et al. 2015; PANG Zhong-he,1987; WANG Jun, 1992). Compared with these two systems, the low medium temperature geothermal system in granite areas in China’s South-East coastal areas is different from them.

According to previous researches, the geothermal system of the Zhangzhou Basin is controlled by fault and groundwater convection system heated by earth deep heat (XIONG Shao-bo,1991; HU Sheng-biao, 1990; XIONG Liang-ping,1990a; HAN Qing-zhi and ZHANG Qing-xiang,1988; PANG Zhong-he, 1990a, b; NIAN Wei-zhen,2008; WANG An-dong, 2015). However, how the fault system specifically controls heat convection and exposure of hot spring has not been studied carefully. The paper measures the temperature of several exposed hot springs in the Zhangzhou Basin and analyzes their chemical component and calculates its corresponding geothermal reservoir temperature to analyze the control action of main faults of the Zhangzhou Basin on subsurface thermal convection and provide evidence for related researches of the heat-controlled impact of fault.

1 Geological outline of geothermal field in Zhangzhou Basin

China’s Southeast coastal areas are located on the eastern edge of Eurasia. From the end of Pliocene epoch to Pleistocene, collision and push between Philippine Sea Plate and Eurasian Plate and recent expansion of Taiwan Strait resulted in intense new structural movement in this area(XIONG Shao-bo, 1991). The Zhangzhou Basin is part of medium-low temperature geothermal area in China’s southeast coastal areas and also the current geothermal anomalous area with the highest temperature in southeastern coast (LI Da-xin, 1988; ZENG Yu-chao, 2012; LIN Wen-jing, 2015).

1.1 Geological setting

The main geothermal anomalous area of Zhangzhou Basin is located in Late Yanshanian granodiorite rock mass. Its main emergence stratum is Quaternary sedimentary layer and eluvium, late Mesozoic sedimentary layer and Late Yanshanian rock mass. After the Cretaceous period and before Quaternary, hidden layer appeared frequently and intruded by acid rock body in the bottom (Fig. 1).

Quaternary sedimentary layer and eluvium:Sedimentary layer is formed by alluvial-proluvial fan, slide rock and marine deposition and its thickness is generally 20-30 m, which is marine-terrigenous facies from Late Pleistocene to Holocene. Sandy gravel and pebble bed in Late Pleistocene have good porosity and permeability.Eluvium is mainly formed by acid rock weathered crust whose thickness is generally 10-30 m.

Mesozoic sedimentary layer refers to volcanic sedimentary rock developed in Triassic period,Jurassic period and Cretaceous period, which is mainly distributed in Changtai rock mass and the west of Chengxi rock mass with the thickness of 30 m to 1 500 m. The late Triassic wenbinshan group, Early Jurassic pear mountain group,Fankeng group, Middle Jurassic zhangping group,Late Jurassic south park group and early Cretaceous Huangkeng Formation strata emerged from the bottom to the top. Sedimentary facies are mainly constituted of pyroclastic rock and quartz sandstone.

Fig. 1 Diagram of the structure of Zhangzhou geothermal field

Late Yanshanian rock mass mainly refers to cretaceous monzonitic granite and granodiorite in the basin. It covers a large area and is buried in shallow regions and largely emerges on the surface.

1.2 The distribution of hot springs

According to the analysis of 56 emerged hot springs in Zhangzhou, hot springs mainly distributes from North to East. From Fig. 2, hot springs in Dongshan, Yunxiao, Zhangpu, Longhai,Zhangzhou, Changtai are obviously controlled by Pingtan-Dongshan NE deep fault; Hot springs in Zhaoan, Pinghe, Nanjing and Huaan are obviously controlled by Fuan-Nanjing NE deep fault.According to previous researches, most hot springs emerge from ridge or sunk shaft inside and a few from ridge or sunk inflexion inside (ZHU Wen-xiao,1988; YANG Li-zhong, 2016; LIU Tang-wei, 2016).These researches mean that shallow geothermal anomaly is closely related to deep-seated thermal background (GAN Hao-nan, 2015).

Zhangzhou geothermal fields along worker’s sanatorium-Longxi Normal University are moderate temperature hot water with an area of 0.094 km2. Intermittent blowout and continuous blowout successively happened in the ZR14 hole in the geothermal center. The temperature of orifice is 105.0and that of hole-bottom is 121.5 ℃ (the hole depth is 98.29 m) and flowing yield is 485.72 m3/d.

Fig. 2 Distribution diagram of hot springs in Zhangzhou

1.3 The characteristics of the storage of geothermal water

In the research on the reasons and assessment of geothermal system, the research of hot water isotopic composition and its formation plays an important role in determining the recharge source of hot water, inherent characteristics of waterbearing system, the process and mechanism of thermal effect of geothermal system, the measurement of the age of geothermal water and judgment of reservoir temperatures. Zhangzhou area has rich geothermal resources. A measurement of H-O isotope indicates that hot water is closely related to precipitation and isotope of hot water changes under the influence of external factors during its formation and movement. Combined with specific conditions of Zhangzhou geothermal system, mixture of seawater is likely to influence hydrogen and oxygen isotopes of hot water (PANG Zhong-he, 1987). According to the isotopes of fresh water, the elevation of recharge area of precipitation is 930 m. Combined with the topography of basins,the northwestern area of the Zhangzhou Basin is the main recharge area of geothermal water (PANG Zhong-he, 1990b).

2 Collection and process of samples

The hot spring samples in this research are collected in 2015. The collection and test of samples were seriously in line with Geologic Exploration Standard of Geothermal Resources(GB/T11615-2010) and Water Quality Inspection Method (DZ/T0064-1993) and these samples were analyzed and processed by Groundwater Mineral Water and Environmental Monitoring Center of the Ministry of Land and Resources. These samples were totally classified into 16 groups which were all samples of hot spring except that samples from Baixiangyuanshan were hot water.

3 Result and discuss

3.1 Temperature field distribution of hot springs

Table 1 is the temperature and water chemistry data of hot spring samples in the Zhangzhou Basin and Fig. 3 is the temperature contour map of hot springs in the Zhangzhou Basin according to collected temperature of samples. According to Fig. 3, temperature along Dongsi Spring-Tangan Spring-Xing Linwan Spring is relatively high,whose direction is equal to NE Pingtan-Dongshan Fault. Such fault can be indicated to have an important control action on the formation of hot springs along the way. The temperature along Xiangcheng District hot spring and Tangkeng hot spring is relatively high.

The line of Xiangcheng district hot spring-Dongxi hot spring-Pangu hot spring is equal to Tianbao-Zhangzhou NW fault (F2, Fig. 1), which indicates that this fault is also main control thermal fault. While Xintang hot spring in the south bank of Jiulong River, only 5 km to Xiangcheng district hot spring is located in an area of low temperature.Such difference is related to another NWW Yangxi-Yuanshan Fault. Its thermal structure is conducive to the uplifting of hot water to shallow part. While Xintang hot spring is located in down-thrown side. Such fault zone resists hydrothermal activity, which results in temperature mutations. Another evidence is from data of diastrophism of Zhangzhou and its neighboring areas. In Fig. 4 (PANG Zhong-he, 1987), there is a positive and negative gap of crustal rise and fall in NWW Yangxi-Yuanshan Fault. The north (the hanging side) of the fault has been rising since modern times and the south (the footwall) has been descending, which has the compressing property of reverse fault. Such principal stress results in the discontinuity of hydrothermal activity on faults.According to Fig. 2, Yangxi-Yuanshan Fault is likely to be a part of Nanjing-Xiamen Fault.

3.2 Reservoir temperature

Geothermal geochemistry method is an effective way to calculate reservoir temperature.Now several methods are used to calculate reservoir temperature in the deep area of geothermal fields,including cationic temperature scale and silicon scale method. In Zhangzhou area, due to interfusion of abundant seawater, cations such as Na, K, Mg in thermal field are not controlled by temperature.This eliminates the necessary application condition of cation temperature scale closely related to composition of seawater. This cation temperature scale is not used for calculation of reservoir temperatures in Zhangzhou.

ater g w prin ot s ple h am f s lysis o na l a mica f che e result o Th ble 1 Ta fle re o tu pera re sca Reservoir tem peratu 2.27 2.96 0.62 2.14 8.60 3.18 6.01 3.74 0.51 8.05 6.07 5.10 1.99 2.39 artz tem 141211 3.54 12121313121011139.20 13135.68 11121314 o ric acid Qu etab 0.78 0.23 1.44 0.55 0.59 0.54 0.65 0.30 0.79 0.31 0.36 0.34 0.42 1.42 3.31 2.84 0.77 SiO2 M 00 76.8 63.80 73.400 52.1 71.4 98.0-- F .00 109.38.50 75.60.90 102.54.40 93.00.00 81.40.50 88.54.40 101.540.90 66.60.90 80.00.40 91.00.00 109.62 O3 O3 N .00 2 0.20 17.50 3 <0.20 11.00.20 17.00.25 2.36 2.68 2.36 5.34 11.00 0.20 11.00.68 2.52 3 0.20 18.50.08 1.92 1.20 2.00 2 CO3 C .00 5 17.8 0.00 <.89 0 11 0.00 3 105.8 00.00 3 0.00 4 0.00 2 0.00 0.89 <11 0.00 2 0.00 1.89 <11.00 8.00 7.00 9 5 00.00 5 47.7 4 154.1 8 0.8 5 0 SO4 H 241.9 30.22 78.5 267.1 48.35 130.0 114 48.3 159.4 90.67 78.3 307.4 42.31 7 33.24 71.5 8 126.9 67.6 151.4 76.16 213.3 72.53 220.0 36.87 5 151.1 80.7 147.9 105.8 Cl.04 29.88.64 4306 148.0.08 135.3.04 29.886845 4 715669149720 662.1 06.82 4 8.48 6 4.26 2 5.13 12.30 0.013 12.30.50 3 6.19 2 2.10 19.33 10544 467.5 10214 347.0 12 Mg .0.77 4 3 Ca 024 5 4 0 4.22 0 3 0 258 11.58 846 9.1 1 99 2 0.0 4 85.4 2 37 6 0 882 163.6 022 117 943 56.60 029 5 Na 598 1.6 4.0 37.0 2 85 2.0 4.7.6 5.6 5.8 746 1 9 1.94 1 8 114276 1 289 3 1.57 7.2 350 9 4525018 2 572 2 916 2 607 1 K 9 9 7 115.0 11.94 <3 1 893.05.14 1737 1332 7 515.84 1 5.06 2.45 1 36 5.82 1 4.06 9.50 4 79 0.7 4 13 4.3 4 20.12 1 91 H 0 3.2 7 3.9 4 6 1 7 9 1.6 5 2.5 7 4 1 4 6 4.3 T/℃ p 7.07 8.82 6.82 6.97 6.64 7.08 6.81 7.07 73 g) 47.5 7.6 70.5 65.1 g) 77.4 6.9 g) 64.5 6.9 41 g) 36.5 7.8 t spring) 55.6 8.9 56 62.7 g) 45.8 8.9 7172 Place ngling (hot sprin Tangdou (ho Xintang (hot sprin 10130 4 T angkeng (hot sp ring)u (hot sprin 10140 5 X iazhuang (hot sp ring)ei (hot sprin t spring) 50.5 7.0 w eitangto u (hot sp ring)Pangu (hot sprin t spring) 68.6 8.8 t sp ring)ake (ho Tianli (ho Tangan (hot spring) 74.4 7.0 Baofeng (ho t sp ring)wan (ho Yuandang Lan (ho t sp ring)shan (ho t sp ring)Dong Xinglinw Nu mb er 111828 B aixiangyuanshan (hot w ell)101203 101406 Jing So 101507 Wuyuan Xuem 101202Gang 2811 10 102813 102814 103015 103016 3117 10 110319 110320 110623 110421.cn rg.o eg wse.ih://g http

Fig. 3 Temperature contour map of hot springs in Zhangzhou-Xiamen area

Fig. 4 Deformed crust in Zhangzhou and neighbouring areas

The scope of application of quartz thermometer is 0-250 ℃, which applies to Zhangzhou geothermal fields. According to field detection of the author, PH values of hot water in Zhangzhou Basin are all lower than 8.5, which eliminates the influence of SiO2in the form of metasilicate acid.The formula of quartz thermometer is as follows(Fournier, 1977):

The project team collects hot spring samples in 16 areas in Zhangzhou-Xiamen and conducts complete chemical analysis to get the content of SiO2. The team puts the figures to the formula to calculate the corresponding of natural hot springs(Fig. 5). In Fig. 5, the high reservoir temperature concentrated in the northern area of Jiulong River and in the southern area of it only Dongsi and Songling have relatively high reservoir temperature.The Xiangcheng hot spring and Xinglinwan hot spring whose temperature is relatively high but their reservoir temperature is not high.

A profile from Tangkeng hot spring to Xinglinwan hot spring (the location of the profile is A-B in Fig. 5) is made to compare and analyze the trend of NEE temperature and reservoir temperature. In Fig. 6, the outlet temperature of hot springs near Xiangcheng hot spring along NEE direction have obvious mutations to reach the highest of 105 ℃ and then gradually decrease and stabilize to 70-80 ℃; While reservoir temperature curve has not an obvious mutation. Reservoir temperature slowly increases along NEE direction and increasingly go up near Xiangcheng hot spring.It reaches the highest temperature of 142.39 ℃ near Xinglinwan hot spring and then slowly declines to 130 ℃. Comparing outlet temperature curve and reservoir temperature outlet, both have mutations of different levels at Xiangcheng hot spring.Combined with Fig. 1, it is indicated that Yangshan-Yuanshan Fault of NWW direction goes through the mutation. In the perspective of the control action of it on temperature field,Yangxi-Yuanshan Fault is part of Nanjing-Xiamen Fault and this Fault has obvious effect of water blocking and flame resistance, which is equal to its hydrogeological feature. The reservoir temperatures of hot springs on the west of Xinglinwan hot spring reach the highest and corresponding outlet temperatures of hot springs go up temporarily,which is indicated to be affected by Pingtan-Dongshan Fault here. The trend that Pingtan-Dongshan Fault slides to the left results in plastic deformations such as ductile shear zone,which is the main heat controlling fault in Zhangzhou is generally agreed by scientists(ZHUANG Qing-xiang, 1988; XIONG Shao-bo,1991; KE Long-sheng, 1997). This study also proves that these areas near the fault have relatively high reservoir temperature.

Fig. 5 Contour map of reservoir temperatures of hot springs in Zhangzhou-Xiamen area

Fig. 6 Profile map of hot spring temperature and reservoir temperature of Tangkeng-Xinglinwan hot spring

3.3 Circulation depth

There are previous researches on circulation depth of hot water in Zhangzhou area. According to the calculation in Zhangzhou Geothermal Survey Report (1988), the circulation depth of hot water is 3 000 m; the circulation depth of hot water according to quartz thermometer calculated by XIONG Liang-ping and other professors (1990) is 3.5 to 4.0 km.

1.Gentleman:Cinderella s status as a gentleman s daughter makes her more acceptable as a future king s consort45. It also places her above the status of peasant. Cinderella is not usually a rags-to-riches tale, but a riches-to-rags-to-riches tale.Return to place in story.

The formation of geothermal water in Zhangzhou area is that precipitation infiltrates and recharges and then gains deep heat flow through deep cycle to be heated and flow to the surface.Geothermal water gains heat mainly through deep cycle and heated geothermal fields. Assuming that geothermal water gains heat through certain deep cycle and forms its own temperature and then flows to the surface and emerges, the cycle depth of hot water is calculated according to the following formula (WANG Ji-yang, 1996):

H is cycle depth of hot water with a unit of m. q is geothermal gradient whose unit is ℃/km; Tcalis reservoir temperature of geothermal water whose unit is ℃; T0is the average temperature of research area whose unit is ℃; h is depth of normal temperature zone whose unit is m.

According to basic data of Zhangzhou area, the value of T0, the average temperature in research area is assigned as 21 ℃. The depth of normal temperature zone h is assigned as the maximum 30 m from the soil depth of constant temperature 20-30 m. The reservoir temperature of hot water is assigned as the reservoir temperature calculated by quartz thermometer (Fig. 5). Therefore, only the value of geothermal gradient is difficult to be determined and the average value of geothermal gradient in this area is often assigned as the stable geothermal gradient of deep well in the area.

According to the result of drill detection of hot dry rock in the forest farm of Zhangzhou-Dongsiqing hot spring (LIN Wen-jing, 2015),2 500-3 500 m geothermal gradient is stable and temperature-sensing curve is flat, which is used to estimate geothermal gradient in this area. The average geothermal gradient of this layer is 23.47/km. Put this geothermal gradient and calculated reservoir temperature into the formula, we find the range of cycle depth of hot water in Zhangzhou Basin is 3 550-5 200 m, which is near to previous calculation. Under the same geologic structure and geothermal geology, the higher the geothermal gradient, the smaller the cycle depth, which makes groundwater heat up to a certain temperature.

4 Conclusion

1) Fault has control action on the movement of geothermal water in the Zhangzhou Basin. There is a heat structure gap between the top and the bottom of NWW Yangxi-Yuanshan Fault. Xiangcheng hot spring and Xintang hot spring are respectively located on the top and the bottom of Fault. The resistance to hydrothermal activity by fault zone results in the mutation of their temperatures.

3) Through an assignment of average geothermal gradient in the Zhangzhou Basin, the cycle depth of the geothermal water in the Zhangzhou Basin is calculated as 3 550-5 200 m and the cycle depth of geothermal water in the north of Nanjing- Xiamen Fault in the Basin is larger than that in the south.

Acknowledgements

This study is supported by Basal Science Research Fund from Institute of Hydrogeology and Environmental Geology (Grant No. SK201606 and SK201501), China Geological Survey Project(No. DD20160191 and DD20160190). CHEN Xiang-yang and NIAN Wei-zhen of Minnan Geological Team are greatly appreciated for their efforts on the research.


登录APP查看全文