GPSKLOBUCHAR模型改正精度异常现象分析

2018-01-23 15:16:02鲁强
价值工程 2018年3期

鲁强

摘要:对于GNSS单频用户而言,广播电离层模型是电离层的延迟改正的主要方法。 目前,用于全球的广播电离层模型有GPSK8模型、BDSSH模型、和NeQuick2模型。本文对GPSK8模型在17年5月份北半球中纬区域分析时,发现在个别测站上出现改正精度较差的异常现象。作为比对模型,还一同分析了NeQuick2模型和BDSSH模型。对出现的异常现象展开研究和分析,其结果表明模型改正精度出现异常的原因是测站的实测基准存在异常所致。

Abstract: For GNSS single-frequency users, the broadcast ionosphere model is the main method for the delayed correction of ionosphere. Currently, the global broadcast ionosphere model has GPSK8 model, BDSSH model, and NeQuick2 model. In this paper, the model of GPSK8 was analyzed in the northern latitudes of the northern hemisphere in May 17, and it was found that the abnormality of correction accuracy was found on individual stations. As a comparison model, NeQuick2 model and BDSSH model are analyzed together. The results of the study and analysis of abnormal phenomena show that the anomaly of the accuracy of the model correction is caused by the anomaly of the measured datum of the station.

关键词:GPSK8模型;BDSSH模型;异常现象分析;实测VTEC

Key words: GPSK8 model;BDSSH model;abnormal analysis;The measured VTEC

中图分类号:P228.4 文献标识码:A 文章编号:1006-4311(2018)03-0146-05

0 引言

随着GNSS定位技术的发展,电离层延迟误差成为影响GNSS定位的主要误差源之一[1]。国内外学者对此有着深入的研究,其结果表明在太阳活动的平静期,电离层延迟引起的天顶方向测距误差一般在5~15m,在太阳活动高峰期影响可达上百米[2,3]。对于双频接收机,可以通过双频消电离层组合消除电离层一阶项;但对于单频接收机而言,主要是通过电离层模型进行改正,目前常用的广播电离层模型有GPSK8、BDSK8、BDSSH9、NeQuick2模型等。

常见的几种广播电离层模型都是实时播发电离层参数给用戶进行延迟改正,但这几种模型在参数的播发上各异。GPSK8模型通过电文播发K8参数用于修正电离层时延误差。新一代北斗全球广播电离层模型-BDSSH模型主要根据卫星位置、用户概略位置、导航电文播发的电离层参数及固化于用户接收机的非播发电离层参数即可帮助单频用户计算电离层延迟改正。NeQuick模型是一种半经验模型,通过电文播发三个电离层矫正参数进行电离层延迟改正。……

登录APP查看全文