张爱支
摘要: 伴随我国国民经济的快速发展,城市建设力度逐步加大。为实现城市现代化发展,必须进一步扩大城市道路建设规模。给排水管道工程作为现代市政道路施工的重点,如何提高施工质量极为关键。为此,本文结合具体案例,对道路给排水管道工程施工标准进行分析,并探讨了其施工工艺及具体施工中的质量控制措施。
Abstract: With the rapid development of national economy in China, the intensity of urban construction is gradually increasing. In order to realize the urban modernization, it is necessary to further expand the scale of urban road construction. As the key point of modern municipal road construction, water supply and drainage pipeline project is the key to improve construction quality. Therefore, this paper analyzes the construction standards of road water supply and drainage pipelines with specific cases, and discusses the construction technology and quality control measures in concrete construction.
关键词: 市政道路;给排水管道;施工标准
Key words: municipal roads;water supply and drainage pipelines;construction standards
中图分类号:TU991.05 文献标识码:A 文章编号:1006-4311(2018)11-0090-02
1 工程概况
某市政道路工程采取雨污分流措施,污水处理效果良好。在道路西侧非机动车埋设污水管道,非机动车道宽2m,与路牙相距1m左右。该工程部分路段道路两侧为保育用地,如K1+560~K2+100段,该路段无需进行截污干管设置。本工程所需污水干管总长度为2.8km,D300~600mm为管径范围,其中1057m选用D300mm,1065m选用D400,696m选用D600mm。除此之外,在道路东侧非机动车道下埋设雨水管污水管,与路牙相距1m左右,同样保养用地位于K1+560~K2+100道路两侧,根据公路设计要求,无需进行雨水干管设置。利用雨水口路面降水可向道路排水边沟内直接排入,并将急流槽安设到填方路段雨水口连接管出口位置。本工程选用D300~1350mm作为雨水干管管径,其整体长度约4.5km,按照就近原则,向规划水体内排放雨水。
2 市政道路给排水管道施工工艺
2.1 测量放线
依据测量控制点由测量人员做好复测工作,待其检测准确后即可进行工程测量控制网的建立,并按照点面结合的方式做好测量控制工作。施工放样过程中,需将管道中线、井位定出,并在允许范围内做好闭合误差控制工作。……