陈乘新 杜占超 梁克 王国军
摘 要: 批产航天器面临高密度研制和发射的任务形势,如何优化落焊流程,高效保质完成软件落焊工作,且最大限度节省人员和设备等资源配置,成为其研制面临的新挑战。在对某系列航天器软件落焊工作总结的基础上,结合对其他航天器软件落焊工作调研成果,从确保落焊后测试验证有效、落焊效率提升、落焊工作有序进展三个方面进行了深入分析,提出了适应高密度发射批产航天器的软件优化落焊流程。优化后的落焊流程在保证落焊后软件测试验证有效性的基础上,压缩或取消了软件落焊占用的AIT时间,有效提升了批产航天器的研制效率。
关键词: 批产航天器; 高密度发射; 软件落焊; 效率提升; 流程优化; AIT时间
中图分类号: TN967?34; V57 文献标识码: A 文章编号: 1004?373X(2018)14?0088?04
Discussion on simplification of software soldering process for spacecraft
CHEN Chengxin, DU Zhanchao, LIANG Ke, WANG Guojun
(Institute of Manned Space System Engineering, China Academy of Space Technology, Beijing 100094, China)
Abstract: The batch?produced spacecraft is facing the task situation of high?density development and launch. How to optimize the soldering process, complete the software soldering work efficiently and qualitatively, and save utmost the manpower and equipment resources, has become a new challenge facing the development of batch?produced spacecrafts. On the basis of summarization of a certain series of spacecraft software soldering work, and in combination with the research results of other spacecraft software soldering work, deep analysis is performed from three aspects of ensuring the test verification effective after soldering, soldering efficiency improved, and soldering work orderly progressed. The software optimization soldering process suitable for the high?density launch of batch?produced spacecrafts is proposed. The optimized soldering process can compress or cancel the AIT time occupied by the software soldering, and effectively promote the development efficiency of batch?produced spacecrafts on the basis of ensuring the effectiveness of software test verification after soldering.
Keywords: batch?produced spacecraft; high?density launch; software soldering; efficiency improvement; process optimization; AIT time
0 引 言
软件落焊是航天器研制过程中的关键环节之一,该环节需要将设备返回研制单位开展软件落焊、环境试验和电性能测试等工作。随着我国航天事业的稳步发展,航天器的数量越来越多,并逐步型谱化、批产化。批产航天器具有高密度研制和发射的特点,这就需要在确保航天器研制质量的同时提高效率,软件落焊占用研制主线时间过长已不能满足紧迫的研制周期要求。如何在有限的人员组织和设备配置条件下,高效保质完成软件落焊工作,成为航天器研制面临的新挑战[1?4]。
国内外学者对软件落焊流程优化进行了大量研究。如美国学者提出的快速AIT(总装、测试与试验)流程,取消软件落焊环节,软件测试与AIT并行,测试完成后直接在AIT阶段进行参数装订[5?6];……