一种基于飞机结构强度试验的控制线缆检测技术

2018-07-28 07:20:04赵婵张旭洲
科技创新与应用 2018年20期

赵婵 张旭洲

摘 要:在全尺寸飞机结构强度试验中,协调加载控制系统对试验件施加载荷并实施闭环控制,保证加载精度的同时实现加载的可控性。连接各环节的控制线缆的好坏直接影响试验的安全性,为了解决控制线缆的故障检测问题,提出了一种检测方法,对其输出信号进行有效检测,能够在控制线缆接入控制系统闭环回路之前实现线缆完好性检查,提高设备可靠性,保障试验件安全。

关键词:结构强度试验;闭环控制;控制线缆;检测方法

中图分类号:V216 文献标志码:A 文章编号:2095-2945(2018)20-0147-02

Abstract: In the full-scale structural strength test of aircraft, the coordinated loading control system exerts load on the test piece and carries out closed-loop control, which ensures the loading accuracy and realizes the controllability of loading at the same time. The quality of the control cable connected to each link directly affects the safety of the test. In order to solve the problem of the fault detection of the control cable, a detection method is proposed, which can effectively detect the output signal of the control cable, realize the cable integrity check before the control cable is connected to the closed-loop of the control system, and improve the reliability of the equipment in order to ensure the safety of the test piece.

Keywords: structural strength test; closed loop control; control cable; detection method

1 概述

在全尺寸飛机结构静力/疲劳试验中,整个控制回路的试验加载控制系统、试验执行元件、测量元件、试验件由各种线缆连接,试验需求的线缆数量规模大,数量多。试验安装的线缆是否完好,不仅关系着试验执行元件是否能正常使用,以及加载控制系统的命令是否能够正确顺利的传达,测量元件获得的反馈数据能否完整准确的传回,更关系着试验能否顺利安全的进行和试验件的安全[1]。

在现有条件下,由于各种线缆自身的原因,无法直接从外观或表面上检测其好坏,其线缆内部导线的多样性更为具体分析线缆状态带来了更大的困难。传统方法通过万用表对线缆进行测量,一是耗时耗力,二是准确性不高,容易出现误操作。

为此,本文提出了一种在结构强度试验中准确检测控制线缆故障,增强试验设备的可靠性,确保不因试验设备原因引起试验件损坏,同时保证控制精度的线缆检测装置。……

登录APP查看全文