王褀 孙瑞 王火明
【摘 要】应用有限元分析方法对正交异性钢桥面铺装结构进行受力分析,首先根据桥面结构体系确定了有限元分析单元模型,接着分析了不同工况下钢桥面铺装结构体系的位移和应变情况。结果表明,在进行钢桥面铺装设计时,铺装层表面的横向拉应变应作为主要的控制指标,有纵向腹板的结构普遍增大了铺装层材料内部的局部应变值,在超载情况下,无论对于何种铺装结构均会造成很大的沥青混凝土内部拉应力。
【关键词】钢桥面铺装;有限元分析;位移;应变
【中图分类号】U441
【Abstract】The finite element analysis method is used to analyze the force of the orthotropic steel bridge deck pavement structure. First, the finite element analysis unit model is determined according to the deck structure system. Then the displacement and strain condition of the steel deck pavement structure system under different working conditions is analyzed. The structure shows that the steel bridge deck pavement design, pavement surface transverse tensile strain as control index of main structure, longitudinal web generally increased the local strain of pavement material internal value, in the case of overloading, whatever the pavement structure will cause great internal tensile stress of asphalt concrete.
【Key words】Steel bridge deck pavement;Finite element analysis;Displacement;Strain
钢桥面铺装在结构特性上有其自身特点,沥青混凝土铺装层铺筑在正交异性钢桥面板上,钢桥面板和铺装层共同受力,分析沥青铺装层的受力需考虑与钢桥面板的整体受力情况。由于钢板有加劲肋,沥青铺装层在加劲肋顶部会产生应力集中,通过弹性薄板理论不易求解,最有效的分析工具为有限元分析法[1]。有限元方法可以模拟钢桥面及铺装层在不同条件下的受力状况,计算出模型任意部位的位移和应力应变值,从而分析得出铺装体系受力后主要力学指标的变化规律[2],为铺装层的材料选择、结构设计提供可靠的依据。
1. 钢桥面体系有限元分析模型
1.1 单元类型。
(1)根据钢箱梁及铺装体系的结构特点,一般可以采用8节点实体单元和10节点四面体单元来建模[3]。为了比较两种不同单元类型对有限元计算的影响,分别建立了两种有限元模型进行计算,结果如表1所示。……