齐家栋 刘琼 熊湾



摘 要: 为了实现对生球团含水率的无接触式快速检测,建立生球团含水率预测模型。以铁精矿生球团为研究对象,利用中值滤波器去除图像噪声,再提取生球团图像的灰度直方图特征(最大概率灰度、平均灰度、标准方差、平滑度、标准偏差、峰态、偏斜度)及灰度共生矩阵纹理特征(能量、熵、对比度、相关性),分别以其为输入指标,建立粒子群优化的支持向量机回归预测模型对含水率进行预测,比较不同输入特征的预测精度。结果表明:灰度直方图特征预测结果的平均绝对误差和平均相对误差分别为0.037 4和0.524,灰度共生矩阵纹理特征预测结果的平均绝对误差和平均相对误差分别为0.020 1和0.284 5;灰度共生矩阵纹理特征预测精度高于灰度直方图特征预测精度。
關键词: 生球团; 含水率; 机器视觉; 图像处理; 特征提取; 支持向量机回归
中图分类号: TN911?34; TP391.41 文献标识码: A 文章编号: 1004?373X(2018)20?0083?05
Abstract: A water content rate prediction model of the green pellet is established to realize non?contact rapid detection for the water content rate of green pellets. Taking the green pellets of iron ore concentrate as the research object, the median filters are used to remove image noises. The gray histogram features (the maximum probability gray value, average gray value, standard variance, smoothness, standard deviation, kurtosis, and skewness) and the gray?level co?occurrence matrix (GLCM) textural features (energy, entropy, contrast, correlation) of green pellet images are extracted. Taking the extracted features as input indexes, the support vector machine regression prediction model based on particle swarm optimization is established to predict the water content rate and compare the prediction precisions of different input features. The results show that the average absolute error and average relative error for prediction results of gray histogram features are 0.037 4 and 0.524 respectively, while the average absolute error and average relative error for prediction results of gray?level co?occurrence matrix textural features are 0.020 1 and 0.284 5 respectively, which indicates that the prediction precision of gray?level co?occurrence matrix textural features is higher than that of gray histogram features.
Keywords: green pellet; water content rate; machine vision; image processing; feature extraction; support vector machine regression
球团矿是现代大型高炉炼铁的重要原料之一,其质量的优劣将直接影响高炉的生产[1]。球团矿是生球团经过干燥、焙烧加工而成的。因此,提高球团矿的生产质量必须首先提高生球团的质量。目前,国内的生球团生产工艺主要采用圆盘造球法。造球的过程大部分是人工操作,熟练操作工凭借经验控制造球过程中加入的铁精矿混合料量和加水量,难以实现对加水量的精准控制。造球过程中加水量的多少直接影响成球性和生球团强度[2],较多的水分也会增加干燥和焙烧的能耗。……