周瑞云 易茂祥 黄正峰
摘 要: 随着晶体管特征尺寸的不断减小,威胁数字电路可靠性的一个重要因素是负偏置温度不稳定性。为了缓解NBTI效应对电路产生的老化影响,文中提出时延约束、路径约束和考虑非门的可防护性约束的多约束下,通过计算门的影响因数的大小来寻找定位关键门集合,用门替换的方法来防护关键门。通过实验进行证明,文中提出的方法不仅识别出的关键门数量少,且更加精准,老化的时延改善率更高。
关键词: 负偏置温度不稳定性; 电路老化; 关键门; 时延约束; 影响因数; 门替换
中图分类号: TN710.2?34; TP331 文献标识码: A 文章编号: 1004?373X(2018)22?0113?04
Abstract: As the feature size of the transistor decreases constantly, negative bias temperature instability (NBTI) becomes an important factor threatening the reliability of the digital circuit. Under the multiple constraints of time delay constraint, path constraint, and protective constraint considering non?gate, the influence factor of the gate is calculated to search and locate critical gate sets, and the gate replacement method is used to protect critical gates, so as to mitigate the influence of the NBTI effect on circuit aging. The experimental results prove that the method proposed in this paper identifies a small number of critical gates, is more accurate in critical gate search, and has a high time?delay reduction rate during aging.
Keywords: NBTI; circuit aging; critical gate; time?delay constraint; influence factor; gate replacement
随着高新电子技术的迅猛发展,电路的性能和集成度有了较大程度的提高。但晶体管的电压并未随着特征尺寸的降低而减少,此时CMOS的参数逐渐接近物理极限,影响器件的使用寿命,使得器件的可靠性不断下降。CMOS集成电路产生可靠性问题的原因众多,如热载流子注入、电迁移、栅氧经时击穿和负偏置温度不稳定性等。尤其是纳米工艺达到65 nm以下水平, NBTI效应是电路产生失效机制的主要原因[1]。NBTI效应是一种作用于PMOS晶体管的老化机制。根据有关文献表明,电路工作10年后,由NBTI效应引起晶体管的阈值电压增加50 mV,工作速率[2]下降20%。电路有两种工作模式:待机模式(Standby)和活动模式(Active)。在活动模式下,PMOS晶体管的输入信号交替出现高低电平,受到的是动态NBTI效应;在待机模式下,PMOS晶体管的栅极始终处于低电平信号下,受到的是静态NBTI效应。……