宋腾飞 刘慧娟 张振洋 刘威



关键词:内置式永磁电机;电动汽车;弱磁能力;过载能力;调速范围
DOI:10.15938/j.emc.2019.06.000
中图分类号文献标志码:A 文章编号:1007 -449X(2019)06 -0000 -00
Abstract:In order to meet the performance requirements of the electric vehicles (EVs) to the interior permanent magnet synchronous motor (IPMSM) with high power density and wide speed range, the design requirements of the drive motor for EVs have been analyzed by taking a 60kW IPMSM as an example. And the factors that affect the overload capacity and speed range of IPMSM are also analyzed by theoretical research. Then, the influence of d, q axis inductances, saliency ratio and fieldweakening magnetic rate on the motor performances under different topology structures are calculated and compared by the 2D FEM model. Furthermore, the topological structure of stator and rotor are optimized. All the results show that Vshape IPMSM has the advantages of high overload capacity and wide speed range and has potential to apply in the EVs applications.
Keywords:interior permanent magnet synchronous motor;electric vehicles;fluxweakening;overload capacity;speed range
0 引 言
隨着环境污染的日益恶化和新能源产业的蓬勃发展,电动汽车以其低排量、高效率、低成本的优势逐渐取代传统燃油车,在乘用、商用车领域得到了广泛的推广[1-3]。其中,永磁同步调速电机以其效率高、调速性能好、功率密度高、性能优异等特点已成为车用驱动电机的首选方案[4-5],各国电动汽车研发人员对其进行了大量研究。
在不同转子结构的研究方面,Vagati[6]等对内置式和表贴式两种转子冲片结构对电机性能的影响进行研究,发现表贴式结构虽然易于制造但其过载能力、调速性能都远低于内置式结构。对于内置式转子冲片结构,刘向东等[7]发现V型转子结构具有较为全面的电磁性能优势,能够很好的满足车用驱动电机的性能要求。文献的研究者们[8-11]也对不同磁极结构的内置式转子电机进行了性能对比,并做出类似的判断。
在定子结构的研究方面,王艾萌[12]等分析比较了定子采用整数槽和分数槽时永磁电机的性能,得出定子采用分数槽可以降低齿槽转矩,减小空载反电动势谐波含量的结论。文献[13]发现分数槽定子集中绕组结构可减小绕组端部长度和定子铁心损耗,而采用整数槽分布式绕组结构,电机具有较高磁阻转矩以及处于高速区时较小转子损耗等优势。
4 结 论
本文以一台商务车用60 kW内……