单开关辅助换流的谐振直流环节PWM整流器

2019-08-05 07:20:49王强张岩王天施刘晓琴
电机与控制学报 2019年7期

王强 张岩 王天施 刘晓琴

摘 要:为改善传统的脉冲宽度调制(PWM)整流器的运行效率,在直流环节增加与直流母线并联的辅助谐振电路,提出了一种谐振直流环节PWM整流器,其辅助电路只设置了1个辅助开关。在辅助谐振电路处于工作状态时,在每个开关周期内,主开关能完成零电压软切换动作,辅助开关能完成零电流切换动作,辅助谐振电路仅运行1次。详细说明了整流器在1个开关周期的工作过程,给出了设计规则,完成了对辅助电路损耗的数学建模。在10kW实验样机上的实验结果表明特征实验波形符合理论分析,开关器件实现了软切换。因此,该新型整流器处于高频和大功率运行状态时,能实现高效率运行。

关键词:整流器;谐振;软开关;开关损耗;脉冲宽度调制

中图分类号:TM 464

文献标志码:A

文章编号:1007-449X(2019)07-0098-08

Abstract:In order to achieve highefficiency of the conventional PWM rectifier, auxiliary resonant circuit which was in parallel with the DC bus was added in the DC link, and a resonant DC link PWM rectifier was put forward, with one auxiliary switch set in its auxiliary resonant circuit. In the process of commutation, zerovoltage switching was achieved in the main switch and zerocurrent switching was achieved in the auxiliary switch. Furthermore, the auxiliary circuit only needed to work for one time in each switching period. The commutation process of the rectifier was analyzed in detail to give out its mathematical model of auxiliary circuit loss, and the design rules were also given. The experimental results on the 10 kW prototype show that the characteristics of the experimental waveforms coincide with the theoretical analysis and the switches realize softswitching. Therefore, the rectifier can be operated with highefficiency, when it works with the highfrequency and highpower.

Keywords:rectifier; resonance; softswitching; switching loss; pulse width modulation

0 引 言

隨着电网对电能质量的要求越来越高,PWM整流器已成为研究热点。以直流侧的储能方法为依据,PWM整流器包括两类:电压型PWM整流器和电流型PWM整流器。多年来主要围绕电压型PWM整流器展开关于PWM整流器的研究工作,原因是其储能效率的优势比较明显。近些年,电流型PWM整流器的电感储能效率获得了改善[1-3],因此电流型PWM整流器已逐渐成为研究热点。

PWM整流器常以硬开关方式运行,在开关频率和输出功率增大时,开关损耗会明显增大,阻碍了PWM整流器的效率提高和在大功率场合的应用。为改善PWM整流器的运行效率,相关文献提出了多种软开关整流器,其共同点是在三相整流器桥臂和负载之间的直流环节增设辅助谐振电路。……

登录APP查看全文