基于[α]阶逆解耦的多变量内模控制系统研究

2019-09-02 03:28:44施丹许必熙
现代电子技术 2019年9期

施丹 许必熙

摘  要: 由于工业过程控制中存在大时滞现象,使得单变量内模控制难以获得有效的控制,而多变量内模控制成为一种较好的控制策略。文中简单介绍了多变量内模控制的原理,分别基于主回路为控制对象、V规范解耦的原则和[α]阶逆解耦进行内模控制器的设计,阐述了各个控制器的主要思想及其设计的具体方法。通过仿真比较模型匹配与模型失配下的内模控制输出仿真图。由仿真结果可以得出,基于V规范解耦的内模控制器具有较好的控制效果,但是解耦效果存在缺陷,针对非线性系统提出的基于[α]阶逆解耦的内模控制系统具有较好的解耦和控制效果。

关键词: 多变量; 主回路; V规范解耦; [α]阶逆解耦; 内模控制; 鲁棒性

中图分类号: TN876?34; TP391.9                    文献标识码: A                   文章编号: 1004?373X(2019)09?0107?04

Research on multivariable internal model control system based on

[αth?order] inverse decoupling

SHI Dan, XU Bixi

(College of Electrical Engineering and Control Science, Nanjing Tech University, Nanjing 211800, China)

Abstract: Since the single?variable internal model control is difficult to obtain the effective control due to the large time delay in the industrial process control, the multivariable internal model control can better solve the problem. The principle of multivariable internal model control is introduced briefly, and the internal model controllers are designed on the basis of the main loop taken as the control object, principle of V specification decoupling and [α]th?order inverse decoupling respectively. The main ideas of each controller and its design method are described. The output simulation charts of internal model control at model matching and model mismatching are compared with simulation. The simulation results show that the internal model controller based on V specification decoupling has better control effect, but there are some defects in decoupling effect. The internal model control based on [α]th?order inverse decoupling is proposed for nonlinear systems, and the system has perfect decoupling and control effect.

Keywords: multivariate; main loop; V specification decoupling; [αth?order] inverse decoupling; internal model control; robustness

0  引  言

如今工业过程控制中存在大时滞现象,使得单变量内模控制难以应用高增益,使得系统响应缓慢和偏差,导致工业对象难以获得有效的控制[1]。多变量内模控制具有和单变量内模控制相同的特性,该特性使多变量内模控制成为一种较好的控制策略。文献[2?3]提出利用V规范的内模解耦控制器,该方法创造性地运用了模型逆的概念,避免了矩阵求逆的过程,使设计更加简便。

文献[4]针对制冷系统设计了采用集中逆向解耦结构的内模控制方法,在反馈通道上加入滤波器提升制冷系统对负荷扰动的抗扰性,解决了其大滞后、强耦合和扰动复杂的问题。为了进一步提高系统的抗干扰能力,文献[5]提出一种基于支持向量机广义逆内模控制的方法,增强整个系统的鲁棒性。……

登录APP查看全文