基于PC-Crash的单车碰撞事故再现研究

2019-10-21 10:43:14刘肖肖
汽车实用技术 2019年1期
关键词:汽车分析模型

刘肖肖

摘 要:近年来,随着计算机技术产业的飞速发展,道路交通事故分析的传统计算方法已被计算机仿真技术所替代。事故再现技术是鉴定事故责任和分析事故原因的方法之一。为了能更加准确的再现车辆碰撞事故现场,文章进行了基于PC-Crash的单车碰撞事故再现研究,对一起汽车—护栏碰撞的事故进行分析,建立了车辆模型,结合事故车辆勘查痕迹、最终位置及损坏部位等,使事故车辆的运动状态得以仿真。关键词:PC-Crash;事故再现;汽车—护栏碰撞中图分类号:U471.1  文献标识码:A  文章编号:1671-7988(2019)01-71-02

Research on Reconstruction of Single Vehicle Collision Accident Based on PC-Crash

Liu Xiaoxiao

(Southwest Forestry University, Yunnan Kunming 650224)

Abstract: In recent years, with the rapid development of the computer technology industry, the traditional calculation method of road traffic accident analysis has been replaced by computer simulation technology. Accident reconstruction technology is one of the methods to identify accident liability and analyze the cause of the accident. In order to more accurately reproduce the scene of vehicle collision accidents, this paper carried out a PC-Crash-based reconstruction of single vehicle collision accident study, analyzed a vehicle-guardrail collision accident, established a vehicle model, Combined with survey marks of accident vehicle, final location and damaged parts, etc., enable the simulation of the motion state of the accident vehicle.Keywords: PC-Crash; accident reconstruction; vehicle-guardrail collisionCLC NO.: U471.1  Document Code: A  Article ID: 1671-7988(2019)01-71-02

引言

2016年中国共接报道路交通事故864.3万起,同比增加65.9万起,上升16.5%。其中,涉及人员伤亡的道路交通事故212846起,造成63093人死亡、226430人受伤,直接财产损失12.1亿元。道路交通事故万车死亡率为2.14,同比上升2.9%。,其中单车碰撞事故是造成伤亡人数较大、发生数量较多的一类交通事故案例为,因此着重加强单车碰撞事故的研究有着非常重要的社会价值和经济价值。本文运用PC-Crash软件结合事故车辆勘查痕迹、最终位置及损坏部位等,对事故车辆的全过程进行了仿真及分析。

1 案例介绍

2018年08月某日,天氣晴朗,在一条东西走向的沥青高速公路上,驾驶员A驾驶的别克牌小型轿车(驾驶室随车搭乘4人)由石林方向驶往昆明方向。驾驶员A驾车行驶至汕昆高速公路时,为躲避前方突然变道的驾驶员B驾驶的魏派牌小型轿车致使驾驶员A驾驶的车车头前部与护栏相撞,造成驾驶室内3人不同程度受伤,车辆及道路设施受损的伤人道路交通事故。……

登录APP查看全文

猜你喜欢
汽车分析模型
一半模型
隐蔽失效适航要求符合性验证分析
重尾非线性自回归模型自加权M-估计的渐近分布
电力系统不平衡分析
电子制作(2018年18期)2018-11-14 01:48:24
电力系统及其自动化发展趋势分析
3D打印中的模型分割与打包
汽车们的喜怒哀乐
3D 打印汽车等
决策探索(2014年21期)2014-11-25 12:29:50