赖锦雄 周绍鹏 刘诗汉 徐亚宇 潘光焕 赵煜



摘 要:悬架系统是FSAE方程式赛车的重要组成部分之一,对操纵稳定性和行驶平顺性起着决定性作用。研究以《2019中国大学生方程式大赛规则》为设计依据,构建悬架系统设计思路和技术路线,确定影响方程式赛车操纵稳定性、平顺性的基本设计参数。运用CATIA辅助设计软件,建立悬架系统模型,并利用ANSYS进行悬架系统重要零部件仿真分析及结构优化。设计结果表明,运用该研究方法设计的赛车悬架系统符合赛事规则,操控性能良好。
关键词:FSAE;悬架;受力计算
Abstract: Suspension system is one of the important components of FSAE formula car, which plays a decisive role in handling stability and ride comfort.In this study, based on the formula university student 2019 rules, the suspension system design idea and technical route were constructed, and the basic design parameters affecting the stability and smoothness of the formula car were determined.CATIA was used to build the suspension system model, and ANSYS was used to carry out the simulation analysis and structural optimization of the important components of the suspension system.The results show that the suspension system designed by this method conforms to the competition rules and has good control performance.
引言
悬架是车架与车轮之间的一切传力连接装置,是汽车的重要组成部分。它的功用是将路面作用于车轮上的支持力、驱动力及制动力和侧倾反力以及这些力所产生的力矩传递到车架上;吸收路面传给车轮的冲击载荷,衰减由此引起的承载系统的振动,保证赛车行驶的平顺性;其作为车轮运动的导向机构约束车轮上下跳动的轨迹,使赛车达到设计需要的操纵稳定性要求。故赛车的悬架系统对赛车的性能起着至关重要的作用,本文以我校FSAE赛车为研究对象,说明悬架系统设计的过程,并对悬架系统中的重要受力零部件进行有限元分析。
在悬架系统的设计中,首先应根据赛车的特点来确定悬架系统有关的各项性能指标(操纵稳定性、平顺性),然后,选定满足这些性能的悬架系统特性,以及满足其悬架系统特性的方式及方案。由于制造赛车有资金、设备等方面的制约,需要根据实际情况进行调整。……