晁圣棋 邹明华 詹敏 张凤辉 王胜 郭沛文



摘 要:渤海油田目前已进入开发中后期,油井高含水问题日益突出,封堵剂注入工艺作为堵水的关键技术,是决定堵水效果的重要因素。本文针对现有的堵剂注入工艺,通过数值计算及实验模拟出该工艺在堵剂注入过程中存在绕流现象,为提高堵剂利用率对工艺进行了优化,提出了三封隔器注入工艺改进思路,并对比原堵剂注入工艺开展了模拟实验。结果表明:优化改进的三封隔器注入工艺可有效减少原堵剂注入工艺的绕流现象,对堵剂注入工艺的优化改进方向具有一定的指导意义。
关 键 词:渤海油田;封堵剂;注入工艺;绕流
中图分类号:TE 019 文献标识码: A 文章编号: 1671-0460(2020)07-1472-04
Analysis and Optimization of Bypassing Flow of Plugging Agent Injection
CHAO Sheng-qi, ZOU Ming-hua, ZHAN Min, ZHANG Feng-hui, WANG Sheng, GUO Pei-wen
(CNOOC EnerTech-Drilling & Production Company, Tianjin 300452, China)
Abstract: Bohai oilfield has now entered the middle and late stages of development, and the problem of high water cut in oil wells is becoming increasingly prominent. The plugging agent injection process, as the key technology for plugging water, is an important factor in determining the effect of plugging water. Aiming at the existing plugging agent injection process, numerical simulations and experiments were performed to simulate the flow of the plugging agent during the plugging agent injection process. To improve the plugging agent utilization rate, the process was optimized and a three packer injection process was proposed. Simulation experiments were carried out compared with the original plugging agent injection process. The experimental results showed that the optimized and improved three packer injection process could effectively reduce the bypassing flow phenomenon of the original plugging agent injection process. The paper can provide a certain direction for the optimization and improvement of the plugging agent injection process.
Key words: Bohai oilfield; Blocking agent; Injection technology; Bypassing flow
渤海油田的勘探开发始于1966年,作为中国近海勘探开发历史最长和勘探程度最高的油田之一,至今已有54年的历史[1-2]。然而,随着开发过程的深入,渤海油田面临着新的挑战,目前渤海油田进入勘探开发中后期,油井高含水问题日益突出,部分油田综合含水率达到90%以上,严重制约了油田的整体开发[3-5]。
相对生产后期油井高含水后采取的控水补救措施,早期找堵水能够低成本,高效率地进行控水,解决稳产难题。封堵剂注入工艺作为堵水的关键技术,是决定堵水效果的重要因素[6]。
1 概述
现有的堵剂注入工艺(如图1)是通过注入阀注入堵剂,注入阀两端封隔器在注入时坐封防止堵剂外窜,提升封堵剂的利用率。
该工艺在砾石填充完井方式下可能存在封隔器没有完全封隔住注入段两端,致使堵剂外窜污染储层堵塞井筒,因此对现有的堵剂注入工艺开展了研究,并進行了优化改进。……