左继红 刘丽丽 蔡颂 李志鹏



摘 要:利用粒粉散装物料在螺旋输送机内摩擦拖拽原理,对粒粉散装物料与双螺杆的输送量进行研究并建立数学模型,利用ANSYS对双螺杆做有限元分析,根据散装物料特征分别进行粒状和粉状分析,比较ANSYS仿真计算、双螺杆实测、2倍单螺杆实测的输出量,从节约资源和能耗角度考虑最佳的螺杆转速为120 r·min-1。
关 键 词:微粒粉散装物料;双螺杆输送量;ANSYS仿真
中图分类号:TM 53 文献标识码: A 文章编号: 1671-0460(2020)06-1241-04
Study on the Conveying Capacity and Screw Speed of Screw Conveyor for Granular Powder Bulk Materials
ZUO Ji-hong1, LIU Li-li1, CAI song2, LI Zhi-beng2
(1. Traction School, Hunan Railway Professional Technology College, Zhuzhou Hunan 412001, China;
2. School of Mechanical Engineering, Hunan University of Technology, Zhuzhou Hunan 412001, China)
Abstract: The flow characteristics of granular powder bulk materials can affect the conveying capacity of twin-screw conveyor. The conveying capacity of the twin-screw conveyor for granular powder bulk materials was studied, and a mathematical model was established by using the principle of internal friction drag of granular powder bulk materials in the screw conveyor. The finite element analysis of the twin-screw conveyor was carried out by using ANSYS. The granular and powdery analysis was carried out according to the characteristics of bulk materials. The results of ANSYS simulation calculation, twin screw measurement and double single screw measurement were compared. From the perspective of saving resources and energy consumption, the optimal screw speed was determined as 120 r/min.
Key words: Granular powder bulk material; Twin-screw conveying capacity; ANSYS simulation
粒粉散装物料主要通过螺旋输送机进行短距离输送,主要是螺旋输送机结构简单、密封性能好、工作可靠、成本较低、噪音较小。双螺杆输送机是在单螺杆的基础上发展来的,在输送机间的套筒上安装两根螺杆,设置一根螺杆为动力杆,另一根为从动杆,两根螺杆反方向螺旋間互相自由啮合形式转化物料的向前的输送力,双杆输送能力比单杆效果强[1]。
输送机的关键部件在于螺杆,但是粒粉散装物料的流动特性影响了物料的输送量,而且现在的螺旋输送机生产的连续性较差。现在的研究主要在螺旋输送机的结构、螺距和螺旋直径的参数设计对输送性能的影响,很少有从粒粉散装物料的低能耗、高输送研究。[2-5]本文利用粒粉散装物料在螺旋输送机内摩擦拖拽原理,对螺旋输送机关键部件螺杆分析,建立粒粉散装物料与螺杆的输送量进行研究并建立数学模型,利用ANSYS对螺杆做有限元分析,根据物料散装物料特征分别进行粒状和粉状分析,分别比较ANSYS仿真计算、双螺杆实测、2倍单螺杆实测的输出量,从节约资源和能耗角度找出最佳的螺杆转速与输送量之间的关系。……