高建路 周书光



摘 要:通过统计、分析新能源客车应用市场的反馈信息,出现的问题主要体现在新能源线路方面固定不牢造成的线束断开或插接件脱针方面;走向或固定不合理造成的管(线)路与固定体或其它部件发生碰撞与摩擦,发生磨穿、漏水、电阻值降低、报警方面;电线与油管布置不合理造成的着火等方面。本文对上述各类问题进行分析与研究,并抛锚到汽车运行过程中、生产过程中、设计过程中,寻找发生的原因,分析和创新应用非常规的零部件机构,从而提供有效的解决办法。
关键词:新能源;客车;线束;插接件;电阻值;抛锚;创新
中图分类号:U469.7 文献标识码:A 文章编号:1671-7988(2020)21-08-03
Abstract: Through statistics and analysis of the feedback information of the new energy bus application market, the problems that arise are mainly reflected in the disconnection of the wire harness caused by the improper fixation of the new energy line or the disconnection of the connector; the tube (line) caused by the unreasonable orientation or fixation Collision and friction between the road and the fixed body or other parts, wear and tear, water leakage, reduction of resistance value, alarm; fire caused by unreasonable arrangement of wires and tubing. This paper analyzes and studies the above-mentioned various problems, and breaks down into the car's operation, production, and design process to find the cause, analyze and innovate the application of unconventional parts and components, so as to provide effective solutions.
Keywords: New energy; Passenger car; Wire harness; Splice fitting; Resistance value; Drop anchor; Innovation
CLC NO.: U469.7 Document Code: A Article ID: 1671-7988(2020)21-08-03
1 引言
隨着生活水平和质量的提高,人们对围绕生活、交通的各种工具的要求也不断提高,如外出旅游、走朋串友用的客车、汽车、飞机、轮船,做基础建设用的工程机械(叉车、罐车、搅拌)、货物运输机械(拖挂车、货车),做环保用的环卫车(洒水车、扫地车、抑尘车、除雪车、吸污车),还有工厂生产用的各种机械设备[1](冲床、液压机、机器人、注塑机)等,人类的这些要求首先从机械机构方面,应满足硬件的需求,另一方面,还需要相当多的电气来控制上述机械部件,指挥、追踪上述部件工作是否正常和出现问题后的信息处理[2]与反馈纠正。
上述电气功能要求的增加,不但离不开先进机械部件[3]的硬件支撑,也离不开电器件和各相关功能件的开发与应用,更离不开连接各电器件、发电设备及信号接收与传输光纤、电缆、电路、气路等,因此,要想实现或保证上述要求功能的正常工作,必须先保证各管线走向、固定合理,使用性能可靠,工作环境不容易受到损害等。……