徐腾 袁旭峰 班国邦 谈竹奎 徐玉韬 陈明洋



摘 要: 传统配电网网络架构在不停电转供方面采用的技术方案存在不足,对供电可靠性带来一定影响。针对此问题,提出一种基于柔性软开关(SNOP)的不停电转供技术方案,利用背靠背电压源型换流器组成的SNOP将两回馈线柔性互联,实现馈线传输功率的可控性。SNOP装置在馈线发生故障时,通过控制方式的转换可以有效保障故障馈线上所带负荷的正常运行,以实现对馈线间的负载不停电转供。利用PSCAD/EMTDC仿真软件搭建基于SNOP的两端交直流互联系統对所提技术方案进行验证。结果证明,通过引入SNOP装置能够实现不停电转供需求,所提技术方案能够有效提高供电可靠性。
关键词: 配电网; 不停电转供; 系统搭建; 馈线柔性互联; 控制方式切换; 仿真验证
中图分类号: TN876?34; TM46 文献标识码: A 文章编号: 1004?373X(2020)23?0112?04
Abstract: The technical solutions adopted by the traditional distribution network architecture have certain deficiencies in terms of non?stop power supply transfer, which has a certain impact on power supply reliability. Therefore, an uninterruptible power transfer technology solution based on SNOP (soft normally?open point) is proposed in this paper, in which the SNOP composed of a back?to?back voltage source converter (B2B?VSC) is used to flexibly interconnect two feeder lines to achieve controllability of the transmission power of the feeder lines. When a feeder line is broken down, the SNOP device can effectively ensure the normal operation of the load on the faulty feeder line by the conversion of the control mode, so as to realize the uninterrupted power supply transfer of the load between the feeders. The SNOP?based AC/DC interconnect system was built with PSCAD/EMTDC simulation software to verify the proposed technical solution. The result proves that the introduction of SNOP device can realize the demand of uninterruptible power supply, and the proposed technical solution can effectively improve the reliability of power supply.
Keywords: distribution network; uninterruptible power transfer; system construction; feeder line flexible interconnection; control mode switching; simulation verification
0 引 言
现有负荷对供电可靠性的要求越来越高,传统配电网单辐射供电模式难以满足当前负荷对供电可靠性的需求。低压配电网中,常采用UPS作为备用电源,但UPS需要机械开关操作,存在明显的短时断电弊端。双电源自动切换开关(ATS)的出现有效改善了UPS对供电可靠性提升的效果,但ATS缺乏灵活调控性,不能改变双电源自身存在的电压幅值、相位差异等问题,合环运行后不可避免地会出现电磁环流、逆功率等问题,对供电可靠性是一种挑战。
解决这一难题的重要手段是采用优化的网络重构方式,国内许多专家学者针对此问题做了相关的研究。……