滚压强化连杆的疲劳强度分析

2021-10-09 13:49:07彭超张芳梁国祥陈飞常超
内燃机与配件 2021年19期

彭超 张芳 梁国祥 陈飞 常超

摘要: 连杆作为曲柄连杆机构的重要运动构件,发动机在工作时,将活塞的往复直线运动转化为曲轴的转动,因此连杆必须具备足够的结构强度、刚度以抵抗应力突变,同时要拥有较强的抗疲劳性能抵抗循环载荷带来的疲劳失效问题。滚压强化技术能有效提高材料抗疲劳性能与耐磨损性能,增强曲轴性能。本文基于滚压强化技术,结合柴油机关键运动件连杆的实际工况进行疲劳试验,对比强化工艺前后连杆疲劳强度变化情况。

Abstract: The connecting rod is an important moving component of the crank-connecting rod mechanism. When the engine is working, the connecting rod converts the reciprocating linear motion of the piston into the rotation of the crankshaft. Therefore, the connecting rod must have sufficient structural strength and rigidity to resist sudden changes in stress, and at the same time have a strong anti-fatigue performance resists fatigue failure caused by cyclic loading. Rolling strengthening technology can effectively improve the fatigue resistance and wear resistance of the material, and enhance the performance of the crankshaft. This paper is based on the rolling strengthening technology, combined with the actual working conditions of the connecting rods of the key moving parts of the diesel engine, to carry out the fatigue test, and compare the changes of the fatigue strength of the connecting rods before and after the strengthening process.

关键词: 连杆;疲劳试验;滚压强化

Key words: connecting rod;fatigue test;rolling technology

中图分类号:TG405                                      文献标识码:A                                  文章编号:1674-957X(2021)19-0062-02

0  引言

连杆作为曲柄连杆机构的重要运动构件之一,发动机在工作时,连杆的小头与大头分别连接活塞销与曲轴,连杆将活塞的往复直线运动转化为曲轴的转动,是将往复惯性力转化为旋转惯性力的重要构件。在发动机内部的动力系统中,连杆在高度运转下会承载极大的拉、压应力与往复惯性力,该构件是维持发动机正常运行中最关键、最重要的零件之一[1][2]。滚压强化技术能有效提高材料抗疲劳性能、耐磨损性能,增强曲轴性能[3]。本文基于柴油机关键部件连杆的实际工况进行弯曲疲劳试验,对比分析发动机连杆强化工艺前后的疲劳极限。

1  静力学分析及夹具设计

在连杆的运行过程中,连杆受到多种力的作用,进而内部产生极大的拉、压应力与往复惯性力,其中的力主要由以下几种组成:施加于活塞顶面上的缸内爆发力;活塞和连杆组件相互作用产生的回转惯性离心力和自身往复惯性力。……

登录APP查看全文