通用电池系统及其转接支架刚强度及模态分析

2021-10-13 22:14冯富春盛军李彦良李宁
时代汽车 2021年20期
关键词:刚度模态强度

冯富春 盛军 李彦良 李宁

摘 要:為了考察多通用电池系统及其转接支架的刚强度及模态分析是否满足整车性能指标,本文分别进行了转接支架安装点刚度、电池系统及其转接支架强度以及电池系统搭载转接支架前后的模态分析,从以上三个方面模拟验证了通用电池系统通过转接支架连接整车的方案可行性。最终结果显示,该电池系统及其转接支架仿真结果满足整车性能指标。此分析方法和流程亦为日后其它电池系统及其转接支架的开发提供了有价值的参考。

关键词:转接支架 刚度 强度 模态

Rigid Strength and Modal Analysis of Universal Battery System and Its Adapter Bracket

Feng Fuchun Sheng Jun Li Yanliang Li Ning

Abstract:To investigate whether the rigidity and modal analysis of the multi-universal battery system and its adapter bracket meet the vehicle performance indicators, this paper separately carried out the mounting point rigidity of the adapter bracket, the strength of the battery system and the adapter bracket, and the battery system loading. The modal analysis before and after the adapter bracket simulated the feasibility of the general battery system connecting the whole vehicle through the adapter bracket from the above three aspects. The final results show that the simulation results of the battery system and its adapter bracket meet the vehicle performance indicators. This analysis method and process also provide a valuable reference for the development of other battery systems and their adapter brackets in the future.

Key words:adapter bracket, stiffness, strength, modal

猜你喜欢
刚度模态强度
多模态话语理论在英语教学中的应用与前景探析
模态可精确化方向的含糊性研究
基于滑动拟合阶次和统计方法的模态阻尼比辨识技术
计算电场强度常用的几种方法
电场强度叠加问题的求解
电场强度单个表达的比较
求电场强度的新方法お
民用飞机翼面结构快速设计方法研究
某型飞机操纵摇臂拓扑优化研究
FSAE电车车架的结构分析