压桩机边桩工作的自动调平系统仿真分析

2015-04-29 03:21:06王博付思峰周卫东
中华建设科技 2015年2期
关键词:仿真

王博++付思峰++周卫东

【摘 要】本文对压桩机边桩工作的自动调平系统进行了研究分析以及仿真,讨论了自动调平难度较高、对压桩机支腿结构等进行研究解决其负荷重的问题、引入了液压控制技术,笔者为了最大限度的消除负载的干扰,认为对干扰力的进行实时监控预测并提前补偿,然后建立压装机的自动调平系统,最后经过仿真后,证明所提出的一系列理论都有利于边桩机自动调平的实现,为系统设计的改进提供了理论依据。

【关键词】边桩机;自动调平;仿真

The automatic leveling system on the pile pressing machine side piling work to carry on the research analysis and simulation

Wang Bo,Fu Si-feng,Zhou Wei-dong

(Henan Aero Geophysics and Remote Sensing Center Zhengzhou Henan 450053)

【Abstract】In this paper, the automatic leveling system on the pile pressing machine side piling work to carry on the research analysis and simulation, discusses the automatic leveling difficulty is higher, on the pile pressing machine leg structure were studied to solve the problem of heavy load, introduces the hydraulic control technology, in order to pass on these problems to improve the press mounting process machine efficiency. The author in order to eliminate the interference load maximum, think of the real-time monitoring and compensation to the disturbance force prediction in advance, and then establish the automatic leveling system of pressing machine, finally through the simulation, a series of theoretical proof of the proposed are conducive to the realization of automatic leveling side pile machine, and provides a theoretical basis for the the improved system design.

【Key words】Paper;Discusses;Fong zhen

1. 序言

全液压静力压桩机是一种可以快速平稳而安静地把预制桩压入地基新型压桩机,采用的技术是高压油所产生的强大的静压力,自动调平对压桩机来说是极为重要的一个技术,替换了原来的人工调整操作,有利于较高水平的调整压装机机身的平稳性,使得将要被压入地基的预制桩与地面保值垂直,由此来提高压装机的工作效率。但在压桩机边桩实际的工作过程中,由于各个支腿承受者较多的干扰,用传统方法控制根本无法将支腿干扰引起的误差抵消掉,其实自动调平是不容易实现的,为了解决这个问题,笔者基于Matlab仿真软件,在文中提出了状态观测器补偿干扰的方法,从支腿的液压系统和压桩机平台为接入点,建立了机液耦合的压桩机自动调平模型,经过仿真,我们发现,要想消除支腿干扰引起的误差并实现压装机的自动调平目标以提高其工作效率,状态观测台系统的补偿作用具有显著的效果。……

登录APP查看全文

猜你喜欢
仿真
Proteus仿真软件在单片机原理及应用课程教学中的应用
工业机器人模拟仿真技术在职业教育中的应用浅析
一种帮助幼儿车内脱险应急装置的仿真分析
科技资讯(2016年18期)2016-11-15 20:09:22
论虚拟仿真实训系统在口腔实验教学中的应用
科技资讯(2016年18期)2016-11-15 07:55:28
基于机电设备电气控制线路排故的仿真系统设计
价值工程(2016年29期)2016-11-14 02:01:16
航空电气系统中故障电弧研究
Buck开关变换器的基本参数设计及仿真分析
试析PLC控制下的自动化立体仓库仿真情况分析
基于MADYMO的航空座椅约束系统优化设计
科技视界(2016年18期)2016-11-03 21:44:44
中国体态假人模型与FAA Hybrid Ⅲ 型假人模型冲击差异性分析
科技视界(2016年18期)2016-11-03 20:31:49