庄雪生 赵福志



摘 要:本文介绍了某多功能支持船甲板新增一套可拆卸的大型犁式挖沟机系统,并针对其A吊的基座焊接加工过程中遇到的技术难题,提出了合理的工艺改进方案,包括嵌入式基座的制作、焊接、基座平面的现场铣平加工、基座螺栓孔的现场定位钻孔攻牙等。
关键词:犁式挖沟机;基座;焊接;铣平面;钻孔攻牙
中图分类号:U664.6+ 文献标识码:A
Modification of the A Bracket Base of Large Plough Trencher
for Multi-functional Support Ship
ZHUANG Xuesheng, ZHAO Fuzhi
( Yiu-lian Dockyards (Shekou)Limited, Shenzhen 518054 )
Abstract: A new set of detachable large-scale 3 000 m deep water plough trencher system will be fitted on the deck of the multi-functional support ship. In view of the technical problems encountered in the welding process of the base of the A bracket for the plough trencher, this paper puts forward a reasonable technological improvement scheme, including the manufacture and welding of the embedded steel base, site milling of the base plane, site positioning, drilling and tapping of the base bolt holes, etc.
Key words: Plough trencher; Base; Welding; Milling plane; Drilling and tapping
1 引言
国内某大型多功能支持船需升级改造,在主甲板新增一套可拆卸式的犁式挖沟机系统,包括:180 t犁式挖沟机、安全载荷为260 t的A吊、主动升沉补偿器及甲板滑车、脐带缆绞车单元、空气软管及液压绞车单元、HPU动力站单元、控制间等设备。
该船具有多功能作业的特点,不需要挖沟作业时,新增的整套系统可整体拆卸吊走,恢复原主甲板平整性。为此,将该系统在主甲板上的各新增设备底座均设计成嵌入式基座,通过现场铣平上平面,配钻孔攻牙后成为该设备安装的新基座。针对该系统的关键部件--A吊及其油缸的新基座,提出一套浮态下基座现场定位焊接加工的方案。
2 A吊基座的安装加工要求
(1)根据厂家的设计要求,A吊基座安放在主甲板船尾一端,以船中為中心对称布置,材质采用NVA-36 Z25高强板, 板厚110 mm,均采用嵌入式钢板;
(2)新钢板下端面与原船主甲板下端面平齐,嵌入钢板四周上部均加工有1:3的过渡斜度,再与原船主甲板对接焊接。其中:A吊基座钢板长3270mm*宽2580 mm,2件;油缸侧基座钢板长3800 mm*2310 mm,2件,左右中心间距17 000 mm,前后……