赵延景
摘要: 随着我国经济水平的不断进展,人们对居住环境和建筑质量的要求不断提高,对建筑物墙体裂缝的控制要求更为严格。由于建筑物的质量低劣,如墙体裂缝、渗漏等涉及的纠纷或官司也越来越多,建筑物的裂缝已成为住户评判建筑物安全的一个非常直观、敏感和首要的质量标准。因此消除砌体结构裂缝已成为我们建筑行业非常关注的课题。
关键词:温度裂缝、干缩裂缝、控制缝
Abstract: along with our country economy level unceasing progress, people''s living environment and construction quality requirements of the improved, the building wall to crack the control requirements of the more strict. Due to the poor quality of the buildings, such as the wall crack, such as leakage of the lawsuit involving disputes or more and more, building the cracks of the residents have become a judge buildings safe very intuitive, sensitive and primary standards of quality. The elimination of masonry structure crack has become our construction industry is very concerned about the topic.
Keywords: temperature crack, dry crack, control seam
中图分类号:TU74文献标识码:A 文章编号:
一、砌体产生裂缝的原因
引起砌体结构墙体裂缝的因素很多,既有地基、温度、干缩,也有设计上的疏忽、施工质量、材料不合格及缺乏经验等。根据工程实践和统计资料这类裂缝几乎占全部可遇裂缝的80%以上。而最为常见的裂缝有两大类,一是温度裂缝,二是干燥收缩裂缝,简称干缩裂缝,以及由温度和干缩共同产生的裂缝。
1.温度裂缝:温度的变化会引起材料的热胀、冷缩,当约束条件下温度变形引起的温度应力足够大时,墙体就会产生温度裂缝。最常见的裂缝是在砼平屋盖房屋顶层两端的墙体上,如在门窗洞边的八字型裂缝,平屋顶下或屋顶圈梁下沿砖(块)灰缝的水平裂缝,以及水平包角裂缝(包括女儿墙)和垂直裂缝。
(1)八字型裂缝:当外界温度上升时,外纵墙本身沿长度方向将有所伸长,但屋盖部分的伸长量比墙体的伸长量大的多,从而导致墙体产生裂缝。
(2)水平裂缝和包角裂缝:平屋顶的房屋,有时在屋面板部或顶层圈梁附近出现沿外墙的纵向水平裂缝和包角裂缝。……