燃机余热锅炉NOx超低排放技术研究与应用

2020-06-21 15:33:52周金华韩超丁纯
河南科技 2020年11期

周金华 韩超 丁纯

摘 要:当前,大气污染物排放标准越来越严格,而提高余热锅炉脱硝效率是降低NOx排放浓度的有效方法。本文结合具体案例,研究了燃机余热锅炉NOx超低排放技术,分析了燃机余热锅炉NOx超低排放技术的应用,以期为燃气电厂超低排放改造提供依据,进一步降低NOx排放量。

关键词:燃气轮机;余热锅炉;脱硝;超低排放

Abstract: At present, the emission standards of atmospheric pollutants are becoming more and more strict, and improving the efficiency of waste heat boiler denitration is an effective method to reduce the concentration of NOx emissions. This article combines specific cases to study the NOx ultra-low emission technology of the gas turbine waste heat boiler, and analyzes the application of the NOx ultra-low emission technology of the gas turbine waste heat boiler, in order to provide a basis for the ultra-low emission transformation of gas-fired power plants and further reduce NOx emissions.

Keywords: gas turbine;waste heat boiler;denitration;ultra-low emission

近年来,由于高效率、低污染的特点,燃气轮机特别是燃气-蒸汽联合循环发电机组在世界主要发达国家得到了迅速发展,我国在大型中心城市以及部分发达地区也上马了大量燃气-蒸汽联合循环发电机组,以取代污染严重的燃煤小机组。在《火电厂大气污染物排放标准》(GB 13223—2011)中,天然氣燃气轮机组NOx排放浓度限值为50 mg/Nm3。在此基础上,北京市于2011年11月23日发布了地方标准《固定式燃气轮机大气污染物排放标准》(DB 11/847—2011),规定NOx排放浓度限值为30 mg/Nm3,出于环保压力,北京市部分燃气发电企业在实际运行中将NOx排放浓度控制在15 mg/Nm3以内。随着环保形势的日趋严峻,不排除国家进一步控制NOx等污染物排放浓度的可能。在燃气轮机不做大型改进的情况下,其出口NOx排放基本稳定,提高余热锅炉脱硝效率是降低NOx排放浓度的有效方法[1-2]。因此,京能集团北京京西燃气热电有限公司对燃机余热锅炉脱硝系统进行改进,最终实现了NOx的超低排放,其排放浓度低于5 mg/Nm3。本文结合该案例,研究了燃机余热锅炉NOx超低排放技术,分析了其具体应用。

1 原脱硝系统基本情……

登录APP查看全文